Technical 28/29 Model A Roadster Pickup Dimensions Needed.

Hey Guys.
I am after dimensions for the cab section only, it must be the stock version, not an extended version. I need the length of the side panels from the B Pillar to the corner. Just two measurments, the first along the base and the second along the top. I am wanting to fabricate the panels this weekend, so any help will be greatly appreciated.

 

See if Brookville can give you the dimensions

 

Mine measures 13 1/2" both top and bottom.

Bob

 

Sent from my iPhone using H.A.M.B.

 

That's a '30-'31.
Bob

 

That's what I was thinking!

 

I realized after I posted, wasn't able to source the 28/29.


Sent from my iPhone using H.A.M.B.

 

I know mine are two inches longer if that'll help.

 

did you take away the extra 2" elsewhere??

 

13 9/16 " top and 13 5/8" bottom on mine.

 

Thanks for info guys. I can get a start on it over the weekend.

 

13 9/16" at the top and 13 5/8" on the bottom. I did assemble a 1928 -29 RPU from mostly from Brookville parts, if you have any questions. Gary

 

https://www.jalopyjournal.com/forum/threads/assembling-28-29-brookville-roadster.1099322/page-2

There are some hand drawings of the 28-29 RPU from B'ville, look around thread for more info. Gary

 

I'm sorry, I added 3 inches to the doors and 32 inches to the quarters.
The doors were the hardest part of the whole build. View attachment 3985007
This kept the proportions better in my mind.
Rootleib made me 5 inch longer aprons and I lengthened the frame and subframe to fit.
I wouldn't have fit or be able to drive the truck otherwise

 

well she is a beauty. well done.