33 coupe 8.8 Ford Narrowed Rear
I bought this rear end knowing that I would most likely have to shorten it. I bought and extra short side axle. You shorten the rear by taking out exactly what the short axle measures. A poor man's narrowed rear is the result. I made a "C" channel jig to hold the pieces of axle while I checked for the correct measurement and squareness to get a good weld. After some spot welds and checking measurements...finish the welding. I should have taken some more pics. Here is the finished rear end with 2 7/8" taken out to make it fit the 33 coupe. I will work on cleaning up the other end and mounting the coil over lower shock mounts.
-
There are no comments to display.
-
- Album:
- 1933 Ford 3 window coupe
- Uploaded By:
- mrharley66
- Date:
- Nov 23, 2020
- View Count:
- 435
- Comment Count:
- 1
EXIF Data
- File Size:
- 1 MB
- Mime Type:
- image/jpeg
- Width:
- 3264px
- Height:
- 2448px
- Aperture:
- f/2.2
- Make:
- motorola
- Model:
- Moto E (4)
- Date / Time:
- 2020:11:23 14:53:09
- Exposure Time:
- 1/120 sec
- ISO Speed Rating:
- ISO 64
- Focal Length:
- 3.2 mm
Note: EXIF data is stored on valid file types when a photo is uploaded. The photo may have been manipulated since upload (rotated, flipped, cropped etc).