The Business Coupe Special

a found bits and pieces collaboration to create a modern rod with pre 1965 technology

Little Johnny Hotrod

another shot

155

18 May 2009

Little Johnny Hotrod

The Business Coupe Special

unknown brakes

141

18 May 2009

welded in place, first time the axle has been on, was pretty stoked, few problems like tie rod clearance 1/4 from frame without any load

Little Johnny Hotrod

The Business Coupe Special

welded in place, first time the axle has been on, was pretty stoked, few problems like tie rod clearance 1/4 from frame without any load

167

24 Apr 2009

Little Johnny Hotrod

The Business Coupe Special

another shot

189

24 Apr 2009

had a neighbour who owns a machine shop make this for me, welded it up too

Little Johnny Hotrod

The Business Coupe Special

had a neighbour who owns a machine shop make this for me, welded it up too

183

24 Apr 2009

for soft top coupes like my business coupe and the sport coupes

Little Johnny Hotrod

The Business Coupe Special

for soft top coupes like my business coupe and the sport coupes

177

25 Mar 2009

hot rod project sketch 1 the actual sketch is about 1.5 inches long but is what i had in my mind. just nice to have it on paper

Little Johnny Hotrod

The Business Coupe Special

hot rod project sketch 1 the actual sketch is about 1.5 inches long but is what i had in my mind. just nice to have it on paper

259

21 Mar 2009

1930's desoto gauge from a swap meet will definitely be unique

Little Johnny Hotrod

The Business Coupe Special

1930's desoto gauge from a swap meet will definitely be unique

168

21 Mar 2009

my home made buggy, my own design in the back, also made on a rough uneven dirt floor

Little Johnny Hotrod

The Business Coupe Special

my home made buggy, my own design in the back, also made on a rough uneven dirt floor

188

21 Mar 2009

Little Johnny Hotrod, Mar 21, 2009

Page 1 of 2

Album Comments

There are no comments to display.

Show Ignored Content

Top

Log in or Sign up

The Business Coupe Special

Little Johnny Hotrod

another shot

Little Johnny Hotrod

unknown brakes

Little Johnny Hotrod

welded in place, first time the axle has been on, was pretty stoked, few problems like tie rod clearance 1/4 from frame without any load

Little Johnny Hotrod

another shot

Little Johnny Hotrod

had a neighbour who owns a machine shop make this for me, welded it up too

Little Johnny Hotrod

for soft top coupes like my business coupe and the sport coupes

Little Johnny Hotrod

hot rod project sketch 1 the actual sketch is about 1.5 inches long but is what i had in my mind. just nice to have it on paper

Little Johnny Hotrod

1930's desoto gauge from a swap meet will definitely be unique

Little Johnny Hotrod

my home made buggy, my own design in the back, also made on a rough uneven dirt floor

Can View Media:

Can Add Media:

Archive

Atomic Industry

Support

Subscribe

The Business Coupe Special

Sort By...

Type Filters

Useful Searches

Archive

Atomic Industry

Support

Subscribe