Blower dimensions

Hey, gang. Does anyone know the length and width of the lower mounting plate, for a 4-71 and a 6-71? I'm trying to see if this setup might work for me. Thx.

Hank

 

6-71 is 13.5" long, rotors are 15" long. Width is 12.25" I measured mine.

4-71 rotors are 10" long, and the base on the 4-71 appears to be as long as the rotors (I only have pics of this on)

 

Hey Squirrel did you mean 15" long with 13.5" rotors?
I kind of always thought the 471 and 671 were pretty much the same length but the 471 had a lower profile due to smaller diameter rotors.
Understand this is just an untrained eyeball type observation with no basis in knowledge or fact.
Just curious about that since the subject was brought up .
T.OUT

 

No, the rotors are longer than the base on a 6-71....15" rotors, 13.5" long base.

 

here's a stock 6-71 next to a stock 4-71

 

Thx for the info, guys - that's just what I needed.