lm looking for a set of drop spindles for my 38 Business Coupe Pontiac. lts the first year for independent front suspenion and it still has the knee action shock. The car goes straight and handles good she has 4inch lower blocks in the back and theres 3 coils cut out of the front so l want some drop spindles for l can get back a little bit of the suspenion travel back and put a new set of coil springs in. Any help would be appreciated. After l get a new set of spindles than lm looking at an installing an air-ride setup to give the rockers on the ground effect.
So you now call the Pontiac your own.Cool ! Try the link below... http://www.fatmanfab.com/06page17.htm I wouldn't give the rockers the ground effect like you say.I agree the car has to be REALLY low but not that low.It's a very bitchin' car with a very traditional early Custom look.Too much lowering will destroy this vibe.Put the ass down to the concrete but for the front the spindles will do.Just my humble opinion.