wheel id please

Did the search & couldnt find this wheel its a 16" 5 on 4 3/4" bolt pattern about 5" 6" wide, still has a tire on it, thanks in advance

Correction 4 1/2" not 4 3/4"

 

That's a 4 1/2'' bolt pattern ... it's from a cornbinder.

 

Stud Pickup, Cornbinders were split rims......

........Roach.

 

302 like it says 4 1/2" lol yes it was a 4 1/2" bolt pattern ty for the correction i did a google search and found a company in Washington http://www.akhwheels.com/pages/showWheel.php?pk=596 its an International 16" X 5" wide

 

Buddy of mine had a 49 Stud pickup, broke out the bolt pattern, only other rim that fit, Chrysler Cordoba.....

 

Studebaker truck....they are a little desirable because a 40's Ford hubcap will fit.
Clark

 

International Truck, late 40's thru about 1965 1/2 tons. They appear in 15" and 16". As others have said, they are on 4 1/2 bolt center and will accept the early ford "snap-in" hub caps. I have a good selection of these for projects. The 16" are harder to find. These wheels fit the 8", 9" Ford rear ends as well as the 8 3/4 Mopar and others I'm sure. I didn't know the Studes were the same. Sam