Register now to get rid of these ads!

Projects Weekend Score, what did you get?

Discussion in 'The Hokey Ass Message Board' started by lewk, Jan 21, 2018.

  1. lewk
    Joined: Apr 8, 2011
    Posts: 1,008

    from Mt

    I got a 58-62 283 short block bored to 301, a 73 truck 350, misc SBC pieces and 2 40's Ford 16s from a junk pile out in the boonies. The owner is selling off his dead father in laws stuff for cheap. There's a '47 big Ford cut off at the cab I might go back for in the spring. It's still got a flathead in it.

    I'm excited about the 301 block. It may have been a screamer at one point. The pistons are toast, but the block seems OK so far. If it checks out, it might be just what I've been after for my coupe. The 350 got wet, so it might be a boat anchor. I got it all cheap enough that I can recycle it and not cry....






    It was nice to get out of town and drag home some crap to tinker with.

    Sent from my iPhone using The H.A.M.B. mobile app
  2. badgascoupe
    Joined: Jul 22, 2011
    Posts: 186


    1924 thru 1929 matched sets of Ma. license plates,fronts are surface rusted but the backs still have the correct colors.
    patmanta, Donuts & Peelouts and lewk like this.
  3. WiredSpider
    Joined: Dec 29, 2012
    Posts: 1,257


    1932 Ford original hood sides
  4. Dupli-color engine paint, full price at Advance Auto!
    swade41, enloe, XXL__ and 3 others like this.

  5. This, and pissed off when my car blew a fuse and left me stranded.... image.jpg
  6. Don West
    Joined: May 18, 2014
    Posts: 71

    Don West

    THE FLU!!!!!!
    Deuces, Jet96, wvenfield and 2 others like this.
  7. haileyp1014
    Joined: Feb 15, 2006
    Posts: 933

    from so cal

  8. lewk
    Joined: Apr 8, 2011
    Posts: 1,008

    from Mt

    Damn dude! I hope the person was cute at least...

    Sent from my iPhone using The H.A.M.B. mobile app
    Deuces, smitron and Jet96 like this.
  9. car doctor
    Joined: May 25, 2011
    Posts: 513

    car doctor

    Bought a 1934 Ford cabriolet. IMG_20180120_111834.jpg IMG_20180120_115629.jpg IMG_20180121_080559.jpg IMG_20180121_080617.jpg IMG_20180101_130540.jpg
  10. Pete Eastwood
    Joined: Jul 27, 2011
    Posts: 1,324

    Pete Eastwood
    from california

  11. squirrel
    Joined: Sep 23, 2004
    Posts: 55,729


    a couple 727 transmission cores to play with for my new go fast car.
  12. sloppy jalopies
    Joined: Jun 29, 2015
    Posts: 5,256

    sloppy jalopies

    Yup '34 cabbie wins...
    I got 10 sheet metal strips sheared and bent to make some home made subfloor channel sections for the coupester's rear kick up ...
  13. scotty t, Donuts & Peelouts and lewk like this.
  14. Wish I'd have picked up that '62 Vette 283......
    chryslerfan55 and lewk like this.
  15. Squablow
    Joined: Apr 26, 2005
    Posts: 17,342


    Good on ya' for saving that stuff, hope it all turns out to be useable. Whatever we don't save will be lost forever.

    I got a neat '59 Mercury steering wheel for my collection and a handful of resale trinkets, nothing really great but it was so warm out it was nice to go poke around in a junkyard this Friday.
  16. WTF really
    Joined: Jul 9, 2017
    Posts: 1,322

    WTF really

  17. edcodesign
    Joined: Mar 30, 2007
    Posts: 4,705


    Picked up this EDELBROCK TORKER 2-0, 2740 IM001897.JPG
    Last edited: Jan 21, 2018
  18. Weather was good, so started gathering parts for the Cape Swap Meet next month.
    I got a box of 21 old gauges at a flea market, 11 of them were Stewart Warner.
    Also picked up a F W Stewart model 800 Speedometer Calibration machine, lots of misc parts and pieces, pluged it up, the light came on and the motor runs.
    Cannot find any info on this machine, if anyone has any, would like to know how all of this works.
    Will try to post pictures Monday
    chryslerfan55, lewk and elgringo71 like this.
  19. 5 foot 2,eyes of blue...........
    Deuces, chryslerfan55 and lewk like this.
  20. wheelguy
    Joined: Feb 19, 2011
    Posts: 414


    Went to a local swap meet > bought a 380 Ruger pistol > GO FIGURE.
    On a positive note, I ran into a friend that has a lead on a pair of 15 x 6 vintage original American Racing "D" spokes.
    chryslerfan55 and lewk like this.
  21. rickl
    Joined: Aug 3, 2012
    Posts: 103


    I got two old bus heaters. Not sure what to do with them[​IMG]
    I should be getting big round ford headlights too.
    Deuces, swade41, juan motime and 3 others like this.
  22. Just some O/T stuff for my O/T's and for a buddie that does trailer hitches....did get a nice new donut spare that'll fit's my early Mopar's.....
  23. 51 on the trailer close r.jpg Got my 51 Ford home as noted in my other thread.
    Deuces, drylakespeedshop and dwollam like this.
  24. A trip to jail and I had to pick up the garbage!
    Deuces, enloe, Bubba1955 and 4 others like this.
  25. Somebody with a big ol' panel truck might be interested (like me :) ) if the price is right.
  26. s55mercury66
    Joined: Jul 6, 2009
    Posts: 4,329

    from SW Wyoming

    You mean you didn't put those letters underneath that pile of garbage?
  27. WTF really
    Joined: Jul 9, 2017
    Posts: 1,322

    WTF really

    They had all that evidence.
    Deuces, Bad Eye Bill and Bubba1955 like this.
  28. I got told that I'm not getting paid, but I still have to show up to work. Thanks to the Government furlough. :-(
  29. 59bones
    Joined: Dec 13, 2010
    Posts: 354

    from Illinois

    But its not Thanksgiving and you dont live in Mass.
  30. topher5150
    Joined: Feb 10, 2017
    Posts: 3,318


    The day before Chassis Engineering ended it's liquidation sale I tried ordering the 41-48 shock kit. The order never went through and was canceled. Talking to someone on the Fordbarn they bought the same kit just for the shocks, and sold me the bracketry for $25.
    Deuces, InstantT and spurgeonforge like this.

Share This Page

Register now to get rid of these ads!


Copyright © 1995-2021 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.