Projects The hopeful beginning of it all (starting a speed equipment brand and land speed racing)

The gas pedal assemblies are finished. Let me know if any of you are interested. I will be updating the website soon.

 

Best looking gas pedal I have seen in a long time.

 

I have some brake backing plates that I'd like to have machined out. The current ones are very 90s looking, Id prefer to have them with a more 70s look. I need to get a good pic/measurement and get in touch with you

 

I'm making a few 4-71 2x2 blower tops. If any one is interested let me know via a private message. Asking $150 including shipping. Thanks!

 

You are making some great products, they have a timeless look to them, and are top quality. One new product suggestion, would be an aluminum firewall mounted heater hose block, done in bulkhead fashion. I suppose it would need 1/2" female NPT on both sides, and would be a clean, sealed up, way to run hoses through the firewall. Just a thought.

 

Hey folks! I've got some exciting news. My McCulloch vs57 to flathead supercharger bracket finally came, which means I can start the process of reverse engineering it and manufacturing them. This project has been a long time in the making, so I'm very excited to get started. I will be making batch that I hope to have completed in a month or so. If anyone is interested, just let me know and I will throw your name on a contact list. I estimate they will run around $450
Thanks,
Nystromperformance.com

 

I second this...

 

Tonight's progress on the vs57 bracket. Beeped the dimensions on the CMM, and started to sketch my version of the new bracket

 

I finally found a local foundry that is able to cast my parts with the required quality and quantity that my parts require. My first parts to be cast by them are the McCulloch VS57 Supercharger to Flathead Ford brackets and tensioner. I made some patterns, sent them out, and had them cast, heat treated, and shot blast. I am now in the process of machining the first batch as well as making casting patterns for products that I have been making out of billet.

 

Pretty amazing stuff! Keep setting goals, keep following your dream!

 

Here is the next pattern going out to the foundry (3 port fuel block)

 

Nice work. Pattern making is a big part of successful casting.

 

Oh Man, you are Nailin It.Nice!

 

The VS57 Supercharger Brackets are now available for purchase at https://nystromperformance.com/coll...lloch-vs57-flathead-ford-supercharger-bracket

Thank you all for the support and advice

 

Unfortunately, the spindle on my beloved robodrill (the mill that makes all my parts) has gone out. I need to pull the spindle and send it out to be rebuilt. This is going to be a pretty substantial bill to flip. If you would like to help us out so we can get back to making hotrod parts, treat yourself to a t-shirt, hoodie, or coffee mug from https://nystromperformance.com/
They also make great stocking stuffers

 

Picked up a couple of 3 port castings fuel block castings from the foundry today. They will be going into the machine tomorrow, and then I will be pulling the spindle from the mill to get it refurbished

 

Thought you were retiring ? Oh whale they say we work more after we do - all the best in 2021 !

 

Very nice parts coming from @flathead 37 . He did a smooth gas cap last summer for one of my projects...

 

I finally managed to snag a vs57 for myself. It will be going on my 37 ford pickup.

 

Anybody looking for a 3 port fuel block? I just finished up a batch of these little guys. Available on my website: https://nystromperformance.com/collections/automotive-parts/products/3-port-fuel-block
Let me know if you have any questions.
Enjoy!

 

How about making a finned aluminum air cleaner for various multi- carb applications? I realize that carb spacing is all over the map for these and don't have any great suggestion to make it adjustable. The little air cleaner elements are just too small.

 

That is indeed on the list to make this year.

 

Our 2 inch lowering shackles are back in stock, and now made from 304 stainless steel!
https://nystromperformance.com/collections/automotive-parts/products/ford-2-inch-lowering-shackles

 

I showed up at work the other week - I'm mostly retired, and noticed that my boss, Don's Radiators is peddling your stuff. Looks good.

 

Yeah,
I spoke with Don. Seems like a great guy!

 

Well the good news is you're looking like keeping things in stock on certain parts is hard. That's not a bad thing. Any idea when the gas pedals will be back in stock ?

 

Currently doing some testing on the new Nystrom fuse box prototype. The final product will replace the 3d printed plastic parts with black cnc machined delrin and polished brass contacts. This box features two power inlets and six glass fuses. I should also have a pretty exciting batch of parts to pickup from the foundry this Friday!

 

So can I assume some of the sold out parts will be back in stock in the near future ?

 

Gascaps, blower top plates, and gas pedals will be brought back. They are currently undergoing some manufacturing process changes.