Register now to get rid of these ads!

Art & Inspiration The 2020 List: What you gonna do? Where you gonna go?

Discussion in 'The Hokey Ass Message Board' started by Jive-Bomber, Jan 9, 2020.

  1. Jive-Bomber
    Joined: Aug 21, 2001
    Posts: 3,301

    Jive-Bomber
    MODERATOR

    Jive-Bomber submitted a new blog post:

    The 2020 List: What you gonna do? Where you gonna go?

    [​IMG]

    Continue reading the Original Blog Post
     
    chryslerfan55 and Tim like this.
  2. 41rodderz
    Joined: Sep 27, 2010
    Posts: 4,756

    41rodderz
    Member
    from Oregon

    Seriously I need to sell my 1927 T Tudor (actually get it listed ):oops: Clear out my rafters and get rid of parts. Find an old truck for shop use and get it going for an everyday driver. I need to slow down on non auto projects so I can focus on that goal.:)
     
  3. oldcargary
    Joined: May 6, 2010
    Posts: 206

    oldcargary
    ALLIANCE MEMBER
    from devore, Ca

    Continue building more cars, even though i say i'm going to quit. :)
     
    stubbsrodandcustom likes this.
  4. Mr48chev
    Joined: Dec 28, 2007
    Posts: 26,971

    Mr48chev
    ALLIANCE MEMBER

    For me it is get the shop done enough that I can actually work inside on a cement floor rather than outside in the dirt.
    I've got enough parts stashed away for the 48 that I should be able to have a finished rolling chassis and have the cab pretty well under way.
    I also have enough pieces collected to get the Model A pretty well under way if I have a place to work on it.
    No road trip events this year outside of maybe going to Bonneville if I get something together to go in. I flat spent too much last year. If I went by my self I could do it without blowing the budget.
     
    29EHV8 and chryslerfan55 like this.
    Register now to get rid of these ads!

  5. DDDenny
    Joined: Feb 6, 2015
    Posts: 13,455

    DDDenny
    Member
    from oregon

  6. Well, the last quarter of 2019 was devoted to prepping to sell our house, listing, showing, selling, and buying a new house, then unpacking and doing some remodeling, with Christmas jammed into the middle of it.

    All truck stuff was put on hold, so my goals for 2020 include clearing all the boxes out of the garage to get the truck into its spot, get my 235 finished up and ready to swap in, the doing the swap. Ideally I'd get all that done before LSRU so I can drive it, but at this point I don't see that happening- My buddy has a client's car in the space we plan to work in at his place. My family stays busy, I work slow, and I don't force myself to stress out over deadlines I impose upon myself, so if we can get the swap done before the summer heat, I'll be happy.

    Then I just wanna drive the damned thing more than I do.
     
    chryslerfan55 likes this.
  7. My 2020 will be slammed trying to finish two father/son projects before the end of November. And, when my oldest son turns 16 in June, he has a plan to go to about every traditional hot rod or custom related event in the country. However, he also has very limited funds, so we will see how much of that we can fit in especially considering project number two needs to be done by late November which takes time and money for the second son who will be 16 then... Sounds like more time building than attending events, but will roll with whatever happens this year.
     
    chryslerfan55 and slim38 like this.
  8. jim snow
    Joined: Feb 16, 2007
    Posts: 1,011

    jim snow
    Member

    Concentrating on getting heat in the coupe. Then on to the Jalopyrama and Steel in Motion in May. Hershey in October. Snowman
     
    lothiandon1940 and pprather like this.
  9. Voh
    Joined: Oct 18, 2006
    Posts: 846

    Voh
    Member

    We are trying to get outChevy on the road. We had set the Roundup as a deadline, but will see.
     
  10. chiro
    Joined: Jun 23, 2008
    Posts: 837

    chiro
    ALLIANCE MEMBER

    Finishing touches on the Model A sedan to coupe conversion. Spring and fall Carlisle, Hershey, TROG, Hot Rod Fall Out and move my over-taxed ass out of NY to VA. Road trips for the vehicles to our new home in VA.
    Andy
     
    chryslerfan55 likes this.
  11. Bluedot
    Joined: Oct 26, 2011
    Posts: 306

    Bluedot
    Member

    Bodywork and paint on my only hobby car, a '40 Ford Standard Tudor. Then interior. I hope. I am v-e-r-y s-l-o-w, dunno how some of you guys keep up with multiple projects at a time. I turn 75 this summer, gotta stay in track if I expect to drive this thing before they take the keys away from me, haha. My Dad turns 102 this year, drove until 98, so hopefully my genes will allow some time yet.
    The good news: the smell of bondo in the morning. :p
     
  12. rustydusty
    Joined: Apr 19, 2010
    Posts: 1,554

    rustydusty
    Member

    Rewire the T, install a new turtle deck and fuel tank, find some steel wheels for the wide white walls I have, and paint...

    Hit a few shows such as; Spring Fling, Cruisin OC, Jalopyrama, and hopefully TROG.
     
    chryslerfan55 likes this.
  13. brjnelson
    Joined: Oct 13, 2002
    Posts: 445

    brjnelson
    Member

    I plan on spending alot of time in Wisconsin this year July Iola Swapmeet then race my Banger at the Sanford Field Showdown and after that the Miller Meet at The Milwaukee Mile for the 100 year anniversary of Harry Miller race cars.
     
    neverdun and chryslerfan55 like this.
  14. Gonna get my vic road worthy enought for the trek to TROG
     
  15. stubbsrodandcustom
    Joined: Dec 28, 2010
    Posts: 1,224

    stubbsrodandcustom
    Member
    from Spring tx

    Few road worthy things to finish on my 53... Then make the trek to Roundup, few other shows and places in Texas, Maybe even venture over to Bayou Roundup end of the year. Last year was the building year on this car, going to do a few things here and there, time to enjoy some seat time and enjoy having room in a classic for the first time in years.
     
  16. 2935ford
    Joined: Jan 6, 2006
    Posts: 3,346

    2935ford
    Member

    Finish up on my '28 Tudor. Finish up on my '29 Coupe........cleanup the garage and time to slow down!
    I hope to be doing way more driving this year and a lot less wrenching.
     
  17. chopnchaneled
    Joined: Oct 21, 2004
    Posts: 1,378

    chopnchaneled
    Member
    from Buford Ga.

    Get off my ASS and finish the delivery ! Then just head out somewhere
    for a road trip, It don't matter where.
     
    WillyKJr likes this.
  18. I am retiring in May. I have plans to get some OT cars off my driveway, do some projects around the home and garage. I need to lose most of the loft in the garage, anything in it will be chucked. I have the local beach and pool at home so I can cool off. One year I'd like to attend SEMA or GNRS and maybe hit Bonneville.
     
  19. junkyardgenius
    Joined: Dec 29, 2005
    Posts: 773

    junkyardgenius
    Member
    from Kernow

    Gonna get my coupe finished, I retired on Dec 30th so have got the time now. Hoping to get to the CHRR this year, planning a trip along PCH. Thats a long way from here.
     
    chryslerfan55 likes this.
  20. Retiring in October. After I take care of some around the house honey-dos gonna get back on that A-V8 coupe that got interrupted by the Bonneville car.
     
    chryslerfan55 likes this.
  21. Boneyard51
    Joined: Dec 10, 2017
    Posts: 4,021

    Boneyard51
    Member

    Going to attend Bonneville Speed week for the first time!






    Bones
     
  22. krylon32
    Joined: Jan 29, 2006
    Posts: 6,285

    krylon32
    Alliance Vendor
    from Nebraska

    My 2020 bucket list is to continue trying to sell my deuce delivery and pu???????? Driving my 40 coupe from Nebraska to the LARS. I realize I sold my deuce lakester project to Dale Grau and he's knocking it out of the park but that at the age of almost 75 I'm getting more bored with myself even though I'm still selling T5 kits and components I need to start another project. Thinking about a deuce roadster even though I have a real one in the museum and this time making it a little more traditional with a flathead. We'll see?
     
    Lil32, 29EHV8, chryslerfan55 and 3 others like this.
  23. Get my 40 PU on the ground
    new gear in the Circus
    Convince the boss I really need a 40 panel truck
     
    chryslerfan55 likes this.
  24. Not gonna park it in a urinal, but I'm gonna drive the piss out of it.
     
    bobss396 and ckdesigns like this.
  25. squirrel
    Joined: Sep 23, 2004
    Posts: 46,148

    squirrel
    Member

    It's way too early in the year to know... but I am planning to go on Drag Week again.
     
  26. DDDenny
    Joined: Feb 6, 2015
    Posts: 13,455

    DDDenny
    Member
    from oregon

    Jim
    Been meening to ask about the Barracuda, ok I asked.
     
    squirrel likes this.
  27. Jeff Norwell
    Joined: Aug 20, 2003
    Posts: 12,968

    Jeff Norwell
    MODERATOR
    Staff Member

    Going to the Pinetree Jamboree!.. and I despise flatheads!
     
  28. brokedownbiker
    Joined: Jun 7, 2016
    Posts: 508

    brokedownbiker
    ALLIANCE MEMBER

    What am I going to be doing? After I rehab from my upcoming knee replacement I'm going to finish the shoebox and get started on the '50 Fleetline.
    Where? I bought my tickets for Viva Las Vegas last week and I'm planning a road trip back to Louisville to see my son in the summer.
     
    chryslerfan55 and Chili Phil like this.
  29. DDDenny
    Joined: Feb 6, 2015
    Posts: 13,455

    DDDenny
    Member
    from oregon

    Holy crap Jeff, have you forgotten your audience?:eek:
     
  30. Petejoe
    Joined: Nov 27, 2002
    Posts: 10,469

    Petejoe
    ALLIANCE MEMBER
    from Zoar, Ohio

    Now Jeff. Is there a mean treated flathead in your history?
    Or has one mean one blown your doors off?
     

Share This Page

Register now to get rid of these ads!

Archive

Copyright © 1995-2020 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.