Hi, some of you may remember me, yea its been awhile, but I am back now ! I have now completely had it with eBay, after 12 years with eBay/Pay-Pal....I am done !, its a long story, but it is allowing me to start over. That and I now have a daytime work schedule that will more allow me to expand my polishing work clientele, this is where my re-introduction comes in.... I was the owner/operator of a Wheel restoration/repair business in San Jose (south bay-area for those in the unknowing). Aluminum wheel polishing, painting, repair ie: straightening, welding cracks, machining worn lug holes for re-use and machining the lug pads for offset changes. I also polish ANYTHING aluminum that I can hold, so car parts, bicycle, motorcycle...whatever also brass, bronze, stainless pot-metal.....etc My humble fleet of cars... 1964 Buick Riviera (black beauty) RIVITNG is the plate its my avatar 1965 Olds.Cutlass F-85 roadster FULL Kustom (think George Barris meets Larry Watson and Ed Roth) 1971 Ford Ranchero GT 429 cobra-jet, ram-air 1973 Chevy Sq.body pick-up 1986 Olds. Cutlass Supreme Broughm a dozen Bicycles; 80's bmx, lowrider and cruiser all the cars are super LOW and have custom wheels..... So Thats me in a nut-shell, any questions just ask.......-SAM
Welcome to the H.A.M.B. You might try posting this on the main page of the H.A.M.B. Message board. A lot of people will see and read it there. This page is mainly for INTRO'S. good luck, and enjoy the H.A.M.B. firstnomad www.angelfire.com/jazz/flatlandstudio
........Welcome back..........Like Firsrnomad said....post on the main board page....you'll get better results.......enjoy the ride on the H.A.M.B........Big Bad John
Post your business on the H.a.m.b. O'Dex and you might consider the Alliance. Welcome from Arkansas...