I was able to score the whole front manual steering from a local guy. I am replacing everything due to the fact that the person who had this before me had a mixture of power and manual steering parts????? My question is when I replace the pitman arm is there anything special I need to look out for? I have read my manual and there are no pointer. Any help would be great as I am doing this today. JIMMY
Not really. Pop it off with the puller, keep everything in the same place so your alignment is not too far off, . . . . . . there should be a small groove that makes sure the arm goes on the right way. Make sure you tighten it to specs and put a cotter pin on the center link side L