Register now to get rid of these ads!

Need a source -- 3/16 ADELE CLAMPS

Discussion in 'The Hokey Ass Message Board' started by Detonator, Oct 23, 2004.

  1. These are the clamps with the rubber covers for brake lines, etc. Been searching for a source for the little 3/16 size. Stainless would be nice, too. Someone sent me a source awhile back... but I've lost it in the shop mess [​IMG]
     
  2. Total Performance - the T-Bucket people - has them.
     
  3. Thanks Jay -- BTW, have you recently relocated?
     
  4. uh oh.... Total Performance doesn't have a 3/16ths size clamp. Same problem I ran into with other sources like McMaster (and they usually have everything). Anyone else?
     
  5. Detonator
    I can get them in black only how many do you need?
     
  6. Blownolds
    Joined: Mar 31, 2001
    Posts: 2,335

    Blownolds
    Member
    from So Cal

    They don't have rubber, but Kugel Kopmonents has some neat stainless clamps for lines.
     
  7. Winfab
    Joined: Dec 10, 2002
    Posts: 260

    Winfab
    Member

    Allstar Performance parts....aluminum band with neoprene cover (black). I sell them if you can't find any at a local performance shop.
     
  8. [ QUOTE ]
    Thanks Jay -- BTW, have you recently relocated?

    [/ QUOTE ]

    Yep.
    Left Sunny California for Sunny, windy, rainy and sometimes snowy Arizona.
    so far, I'm really liking it. There is a very strong hot rod presence in town and lots of cars kicking around.
    If I can find my digi-cam's photo program I'll post a few.

    I won't say the locals are crazy or even wild men, but they're trying to arrange some drag racing on a city street in a nearby community.

    Went to a car show Saturday before last, very small, but a few interesting cars. One, an unrestored 1925 Essex pickup that was still running.

    I'm still trying to get my shop up and running.
    Biggest problem is storage and once I get that squared away I'll be able to park 3 vehicles - one big one, two small ones - in the garage.
    After that goal is met, it's back to building.... [​IMG]
     
  9. Winfab -- BINGO! Those are the ones. And their site says they come in 3/16th. I'll take a couple dozen. (Sure you want to send 'em after my goof-up on those Borgeson U-Joints? [​IMG])

    Jay -- I love it here in Nor Cal, but we've been spending time down in Tucson with friends and we really like it. The desert is quiet and beautiful, and compared to the beach, everyone seems to have more ROOM. The year-round roadster weather appeals, too. Best of luck to you!
     
  10. 29SX276
    Joined: Oct 19, 2003
    Posts: 469

    29SX276
    Member

    Detonator;Adel clamps are used in the aircraft industry;I'd try some of the aircraft supply places or military surplus joints.They come in several colours and are fairly cheap to buy.Good hunting!
     
  11. Detonator,

    Still have access to the
    aircraft aluminum adel clamp w/black rubber inserts free for the asking. Just need an address. If you want them E-mail or post your request.
     
  12. HotRodAV8
    Joined: Oct 7, 2002
    Posts: 88

    HotRodAV8
    Member
    from Seattle Wa

    Not an Adele clamp but summit sells "made for you" product line and they sell those two piece oil and heat resistant plastic blocks. they are two peice with a #10-32 machine screw that clamps them together. work really nice for brake lines as they hold tight. most the time I just tap a hole in the frame and go.
     

    Attached Files:

Share This Page

Register now to get rid of these ads!

Archive

Copyright © 1995-2021 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.