Register now to get rid of these ads!

Projects My next "last" project.

Discussion in 'The Hokey Ass Message Board' started by timwhit, Sep 29, 2020.

  1. A friend of mine had this car in his basement for a number of years. He doesn't normally sell any cars but he has recently. He contacted me to see if I'd be interested in the Phaeton. Long story short, I went and got it Saturday.
    It was an export to South Africa but quite a few years ago made it's way back to the US. It is a right hand drive car. Needs lots of love and some new wood. There's a lot to like about the car but will take a long time to bbuild. My sedan is for sale and is in the classifieds. paheton.jpg 20200926_113656.jpg 20200929_153715.jpg 20200929_153732.jpg 20200929_153721.jpg 20200929_153753.jpg 20200926_200932.jpg
  2. Nice! Too bad you couldn't keep both. For both types of weather.
    Going to put it over to LHD?
  3. Jalopy Joker
    Joined: Sep 3, 2006
    Posts: 25,272

    Jalopy Joker

    Great new "last" project - have fun
  4. catdad49
    Joined: Sep 25, 2005
    Posts: 4,397


    Are you going for the same style minus the top? Cool New Project!

  5. AngleDrive
    Joined: Mar 9, 2006
    Posts: 825

    from Florida

    Nice score!
    kidcampbell71 likes this.
  6. brady1929
    Joined: Sep 30, 2006
    Posts: 8,370


    Nice, congrats.
  7. 41rodderz
    Joined: Sep 27, 2010
    Posts: 5,199

    from Oregon

    That’s cool .
  8. 31Apickup
    Joined: Nov 8, 2005
    Posts: 2,317


    Nice score although can’t believe you’re parting with the sedan after wanting one again for so long.

    Sent from my iPhone using The H.A.M.B. mobile app
  9. rusty valley
    Joined: Oct 25, 2014
    Posts: 1,768

    rusty valley

    wow man, really nice...big project though, dont loose the drive to finish !
  10. Moe than likely but haven't really thought that far ahead.
  11. Would be cool but haven't thought about it.
  12. tub1
    Joined: May 29, 2010
    Posts: 447

    from tasmania

    Phaetons rule in my humble opinion
    kidcampbell71 and 40FORDPU like this.
  13. Congratulations Tim, that looks to be in great condition,

    I'm looking forward to the build. HRP
    timwhit likes this.
  14. 40FORDPU
    Joined: Mar 15, 2009
    Posts: 2,883

    from Yelm, Wa
    1. Northwest HAMBers

    I'm with you on that.

    Congratulations, cool car.
    kidcampbell71 likes this.
  15. Tom: I'm giving great consideration to comverting it to a roadster!!
  16. BTW: I'm selling the wheels and tires that are on the car now if anyone is interested. Four each 17" ?? $200
  17. I have actually made some progress. I had to unpack the car, it had lots of parts laying inside it. One thing that came with it was a new wood kit for the right front door. I got it installed and the door fits and works real well. I have sorted out all the other wood items and have enough to start on the rear doors. Off to a good start. 20201005_152638.jpg 20201005_152618_Burst01.jpg 20201001_132053.jpg
  18. Well, now I have all four doors swingin' and shuttin'!! So, I have headed up front. Got the sheet metal out of the way and started messing with the flatty. First, the fenders have had round rod welded all the way around the lip!! Lots of work but they are sturdy! The flatty is, as best I can tell, is a Merc or Candian. It is 3 3/16's bore (can't tell about the stroke untill I get some more cleanin done), factory relieved and has the round center water jacket. It has a 99 cast in the front of block juset above the water pump. Doesn't matter, I'll likely not use it. Here's some pics. 20201015_135648.jpg 20201116_152529.jpg 20201116_152555_Burst01.jpg 20201116_170534.jpg 20201115_170117.jpg
    catdad49, brEad and kidcampbell71 like this.

Share This Page

Register now to get rid of these ads!


Copyright © 1995-2020 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.