Hot Rods " License plate location on 32 "

I need some pictures of license plate locations on 32 ford tudors that are not running 32 tail lights . I am running a stock gas tank . Please .

 

on the 32 sedan i had,same problem
i put the tag in the middle of the spreader bar,put 2 bust nuts in the spreader bar on the gas tank side so you could not see the bolts,
angled it back,put the tag light on the bottom,ran wire in the spreader bar
looked clean and neat

 

Was thinking the same way . Thanks for the heads up .

 

Danny that is one good looking 32 .I have always liked the sedans better than the coupes .Just cant beat the looks of the roof line from the rear ...

 

Wow Danny... the new sedan looks cool!!! Do you miss the roadster yet?

 

I was trying to find a picture of Carl Von Hofgaareden's tudor, but I cant find one that shows the rear end. I am almost certain that it was centered above the tank between the spreader with a custom frame and bracket. I think that is the way to go! Great looking tudor!

 

Thanks for the pos remarks . Still need some pictures . Please !

 

Not a Tudor, not with a tank, but you are begging for pics

It's a late 40s Olds woodie rear tailgate emblem that will be lighted for the plate....to go with the Olds motor I am using. I hope to cast a new lens that says Rocket 324 or whatever..

My 18 yr old son talked me into using a big diameter push bar/spreader.

 

nowjustwaitadamnminute...you sold the roadster and now are a sedan pilot?...no shit?

 

x2???

 

Who cares where it goes I just want more pic's. Congrats Danny!

 

Danny, PM Scott (Moter). He has a nice setup on the left taillight stand. I don't have any good pics of it.

 

Congratulations what a great looking car!

 

Chopped cdans rule !

 

yes they do, but what did I miss? Is this the chassis rusty did a while back? dont care where you put that plate, just so you are ready to go.

 

Nope but Rusty has my chassis . I am trying to get all the bugs out of her now so I can put some miles on her . Than I'm tearing her down to build it my style !

 

I'm confused! Did you sell the roadster or just buy another 32? Cause Danyelle told me you couldn't sell the roadster??

 

Just did my 3 window with the license on the spreader bar. Use a pair of aluminum brackets that I happened to get from Lobecks/V8 shop. Fastened to the spreader with 2 knurled nutserts. I used a SS backing plate and round license light from Speedway with a SS frame from Drake. Everything was leftovers except the brackets. All the wires are hidden in the spreader bar and it looks good.

 

You could always recess it.

 

I wouldn't put the plate anywhere on the car. Anywhere you put it the plate would just look out of place on that cool ride. I think I'd just cary the plate in the car and take my chances.
Where I'm from cops don't mess with Hot Rods and Muscel cars. I can roll thru down setting off car alarms with slicks and fake plates the cops just give me a thumbs up! Been doing it 20 years!

 

I think the spreader bar is the best option.. The new C-dan rules!!

By the way Danny, I've got a matched pair of Texas 1932 plates. They are straight but need to be sand blasted and painted. Let me know if interested..

 

I think under the left tail light is where I'd put it..I totally dig the sedan, good choice, more room..

 

Sorry only one pic of a sedan but the coupes are mounted off the spreader bar as well.

 

Before you start drilling holes, I'll trade you a brand new Vintique rear spreader bar for that one......i mean it!!!!

 

Thinking ..

 

Factory front mount on the rear works good

 

The spreader bar is the best loction whether in front or behind , centered or off set. I'm going to put mine behind the spreader bar and off set so not to cover the quick change.

Nice Sedan!

 

I am not diggin the center mount at all, and I have plenty of spare spreader bars to use to modify, I think a modidfied side mount will be best looks kinda goofy on top of the tank like those, let me did through my pics

 

Heres some

 

last ones Igot