Let's see those shift knobs.....

This is the tiki I just got from Jaypee. Thing looks much better in person, but here is a pic anyways.

 

Here's mine...

 

the first thing i did when i got this car was change the shift knob.
so here's mine... it also has a Bones china bearing in the middle, so the wheel spins and i took a nut off one of my Krux trucks to tighten it on... fits perfect
I'm always spinning the darn thing at stop lights!
CAB

 

Steve, it was good meeting you at BP '04, thanks for coming out, hope to see you next year. Nice coupe by the way!!!!
Jason "Big Dirty"

 

coupe,

that skate board wheel is brilliant!!!!

 

i have a few of these bad boys!!

 

Got's me a new shift knob yesterday.......

 

heres mine...

 

Is that Grabowski skull? Anyway, here's mine, kinda small. It's a blue mettalic bicycle grip and a bicycle bell for a horn.

 

Mine...

 

Bought the shift knob off ebay then bought the bike in boxes the shift knob was the whole inspiration for the project as I did not have anything else to put it on at the time.
Later Shoe

 

There isn't a more appropriate shift knob for you than this one,Cab !!! Too cool...
P.S. I had a set of Bones bearings and they were hell when new but after I opened them for the very first time to do some "maintenance", all the thrill was gone...man,they really were expensive...

 

This one belongs to a friend of mine...

 

Here's one. It not the knob is't the passenger on the knob.

#2 is the leadglass door knob on my roadster. It's older than the car.

 

Meet Alfred. He came from Go-Kat-Go in Az. I painted him.

 

Here's mine.

 

here is mine

I took a solid piece of one inch aluminum tubing then hollowed out most of it. then threaded one side to fit the 3 way airhose manifold that i got at hardware store. then i took cold rolled steel and hand ground them into spikes and threaded them to go into the airhose ways....

i can remove the spikes when i start riding it because it's dangerous, i guess i can put the spikes back on when i park it!!

 

mine's an old-timey tat-zapper...

 

cab! would it sound funny if i said i checked out your knob at the cow palace show? ..lol...rad! i think the coolest ones represent the driver's craft or personality-nate

 

here's mine. a piston from a 5 hp briggs and stratton

 

Made these out of cue balls drilled out the top and painted the inside then filled with resin and clear coated them. there a little beat up.

 

here is some from the master--NORM GRABOWSKI

 

I have one of those on my 65 Ply. Don't have a pic. Mine is faceted

 

This ones going to be a shift knob on something.

 

I have seen a few people use brass knuckles and they have always looked BADASS cant wait to see what ya use it for.

rjb

 

Heres mine...meet Brainus Horribilus Brootal !!

Rat

 

Here's mine.

 

Here's one I made out of a cylinder from a revolver.
It was a .22 MAG but I drilled it out to... you guessed it...
.32 AUTO...







JOE

 

My flathead shifter.