Hedman headers

I am hunting a picture of a set of hedmans like I bought new in about 1965. They came off the heads with 4 tubes and went down to a rectangleur platewith 2 holes. This was about the same length as a block hugger. The extensions came off of a 2 hole flange and went into a small collecter with a stub that came off the side that the exhaust hooked up too. I am trying to reproduce the collecter pipes so any help would be appreciated.

 

I loved their old design too I believe that they were made for the Corvettes but worked well on the old hotrods. A classic design. I wanted to make a set but I don't have a need for any today. This is from a 1963 Big Eds Speed shop catalog.

 

Thanks, thats what I had and the pictures help a lot. I have the headers just not the extensions and this will help.

 

I had NOS X-CHU-5 extensions and X-CHU2. The 2 ones work slick with an early rod.

I don't see the odd set of NOS very curvy/sexy uppers I had to go with the 2's.

I also had the plainer HCHU-1 uppers, but those were used.

Not sure if I can find a pic of the curvy ones; they were the cat's azz.