HEADERS! Let's see'em

Here is the set that I built for our 30. Started out with a set of 15 dollar swap meet headers, I cut them apart, added 7.5" homeade baffles inside of 3" trumpet flared pipe, and reconfigured the bends and straights for a new look, and something unique.

 

Here's mine, anybody know if they do white ceramacoat & nice headers on the willys Kiwi Kev. Always following your stuff. Dan

 

built these for my `40 chevy coupe...
2 1/4" x 4" w/ f masters...

ratso

 

Here is the ones on my truck.

 

check these out

 

This is from the 2009 Day of the Drags way cool!

 

Heres some I fabbed for my truck.

later,Mark

 

Here are the pipes I made for the coupe using a 36 Ford drive shaft.





and here are the knee burners for the digger.

 

Custom built Stainless.

 

Headers by Stan
​

 

Not a header, but hella sweeter than huggers.

 

Somebody posted these a while back. Said something about Fenton maybe reproducing these again? Anybody know?

 

mine....not so beauty,but build by myself ( from that speedway kit... ), so i`m a little proud of it..

 

made these from a set of mr. gasket headers, a dead cherry bomb, and some tubing "borrowed" from the local chevy garage dumpster

 

If ya like the long individual pipes..............
Larry T

 

Tognotti's Avenger

 

First set I ever tried to make. Modified BBC U-weld it kit to fit my hemi.



Jet Coated...with 14" home made glasspacks in the turnouts.

 

I haven't the health, time or energy left @ age 72 to build my own, and not too sure of the talent to build as nice as most I've seen in this thread.
So I bought a set of the Speedway "32 hiboy" headers for my A hiboy w/SBC. Bought the 26" turnouts but not their internal glasspacks as I want to try a set of spiral baffles I've read about.
I wanted the heat shields like Speedway sells in a kit comprised of turnouts, mufflers and heat shields, but they don't appear to sell the heat shields except in a kit with the turnouts and mufflers.
Anybody got any idea on a source of some sort of Stainless, perforated or expanded diamond mesh to make my own shields?
Dave

 

I wanted the headers on my old 37 to add to the overall hot rod look of the car and I think they accomplished that.

 

Had to make my own, NOTHING off the shelf for Pontiac. Took forever , I got flanges water jetted, MIG tacked them up to each tube, got a mate to TIG , polished each pipe and copper plate before weldin to collector, polish some more then chrome, never again !!, but then I do have another Poncho on a stand while I build a chassis for a Austin pickup, I think I must have some sort of OCD.

 

Last I looked this was not a mud truck forum? What has happend here latley most of the posts are like this!

 

What the fuck is this shit? This is so bad I cant believe you posted this here on the HAMB!

 

are those torque tubes

 

That is sex right there. Beautifull

 

First set for tge Vicky, we have since built a larger tube, equel length 4 into one set for racing,

 

Here's some that my friend Rod Sexton made for my roadster

 

Yep, Rod is a true master.