Does anyone know of any headers that will fit a 1957 plymouth with a big block? I have searched and come up empty, but at least one person has told me they used an off the shelf header for another car. Anyone have any idea? Its a low deck B engine, with a push button torqueflite.
Off the shelf headers would limit you to the a-b-e-c body headers or pickup truck headers these are TTI's a (low deck only) b and e headers most of the others look about the same, except Hookers (and Headers by Ed if you can find them) which are equal length (not how much shorter #7 and #8 are on the TTI's)
i had a 55 plymouth savoy with a 383/727 combo.used some center dump blockhugger type headers from ebay.had to reroute the#2 pipe to clear the upper control arm but i think thats cause my engine was mounted a little low.besides that they worked great and were about 100 bucks new