Register now to get rid of these ads!

Hot Rods Hauling ass on the wrong side of the world

Discussion in 'The Hokey Ass Message Board' started by BLACK STUDE, Sep 13, 2016.

  1. BLACK STUDE
    Joined: Jan 30, 2014
    Posts: 356

    BLACK STUDE
    Member

    Nostalgia Drags 2016.2_zpsotxrsdeb.jpg Nostalgia Drags 2016.3_zps8lqjzukd.jpg Nostalgia Drags 2016.1_zpsrfbxayun.jpg Just saw this on the v8buick board, guy with a 28 dodge sedan. Thought y'all might get a kick out of it. 555 cu in aluminum big block Buick, 9.90/137 mph. Just needs steelies and some hub caps. Sydney dragway. Nostalgia Drags 2016.2_zpsotxrsdeb.jpg Nostalgia Drags 2016.3_zps8lqjzukd.jpg Nostalgia Drags 2016.1_zpsrfbxayun.jpg
     
  2. 49ratfink
    Joined: Feb 8, 2004
    Posts: 18,027

    49ratfink
    Member
    from California

    wow... that's pretty nutty to say the least.o_O
     
    Slimfromnz likes this.
  3. Atwater Mike
    Joined: May 31, 2002
    Posts: 10,434

    Atwater Mike
    ALLIANCE MEMBER

    Some guys'd put a Buick in anything! VERY different, and impressive.
    You're right, steel wheels and caps... Love the wheelies! Big car...wheels in the air...tires smokin'...
    Enough to make me sit in the Spectator side...for a few minutes.

    Thanks!
     
    Slimfromnz likes this.

  4. slowmotion
    Joined: Nov 21, 2011
    Posts: 3,256

    slowmotion
    Member

    That's a damn impressive launch right there. I'd say the man got his suspension homework up to date.
    Hell, even the starter can't help but smile.:D
     
    Slimfromnz likes this.
  5. Wow, cool pictures, thanks for sharing!!
     
    Slimfromnz likes this.
  6. k9racer
    Joined: Jan 20, 2003
    Posts: 3,091

    k9racer
    Member

    Check out what is in the staging area behind him.
     
    cfmvw and Slimfromnz like this.
  7. 904HP @ 6,500 and 830ftlb @t 4,500 both at the crank.
     
  8. Slimfromnz
    Joined: May 29, 2012
    Posts: 6

    Slimfromnz
    Member
    from Australia

    Thanks Zuffen for directing me here.
    As Zuffen stated 900+hp and 830ftlb torque.
    The car is fully engineered to drive on the road here in Australia and we do drive it.
    We uncapped the headers, put slicks on it and raced it in otherwise street trim. Running 3.25:1 diff gears as well.



    Hopefully I have added the youtube clips properly
    Cheers
    Royden
     
  9. Mudgy
    Joined: Dec 4, 2010
    Posts: 231

    Mudgy
    Member

    Awesome mate
     
    Slimfromnz likes this.
  10. Deuced Up!
    Joined: Feb 8, 2008
    Posts: 3,997

    Deuced Up!
    ALLIANCE MEMBER

  11. Raiman1959
    Joined: May 2, 2014
    Posts: 1,427

    Raiman1959

    Impressive!....really diggin' the visual of that ''not-so-common'' car....fine looking wheelie!!!:D:D:D
     
    Slimfromnz likes this.
  12. Slimfromnz
    Joined: May 29, 2012
    Posts: 6

    Slimfromnz
    Member
    from Australia

  13. Bandit Billy
    Joined: Sep 16, 2014
    Posts: 7,435

    Bandit Billy
    ALLIANCE MEMBER

    Yet another reason for fender welting! :cool:
    Good luck on the sale!
    upload_2020-2-24_14-11-18.png
     
    clem, Slimfromnz and chryslerfan55 like this.
  14. DDDenny
    Joined: Feb 6, 2015
    Posts: 14,573

    DDDenny
    Member
    from oregon

    Appears to be an Austin and a Willys.
    What did I win?
     
    chryslerfan55 likes this.
  15. Slimfromnz
    Joined: May 29, 2012
    Posts: 6

    Slimfromnz
    Member
    from Australia

    Not a lot of traction on this country airstrip ;)
     

Share This Page

Register now to get rid of these ads!

Archive

Copyright © 1995-2021 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.