Projects Full Fendered '32-'34 Ford Pickup Wheel/Tire Combo

I'd like to know what others are running for wheel/tire combos on '32-'34 Ford full fendered pickups. I plan to use a 4" dropped beam axle in front and 9"/coilovers in the rear. I know there are those here that will send hate mail but I'm 99% sure I'll go with radials.

 

560s front L78s rear

 

This is my old Deuce pickup,I used wide white bias ply tires, same size as the previous poster. HRP

 

On my last FF deuce pickup I ran 145R15s (24.5 inches tall) on 4 inch rims on the front and 285R16s (31 inches tall) on 7 inch rims on the back.

 

What was the offset on both?

 

I opted for the easy way out , 5.50 - 18


Sent from my iPhone using The H.A.M.B. mobile app

 

Truck looks great sawbuck! Tires give it a great stance and the rears fill the fenders nicely. What are the sizes?

 

Both the front and rear rims were neutral

 

L78s rears.. 8in wheel

 

Is the bed bobbed on this truck?


Sent from my iPhone using H.A.M.B.

 

i sectioned the bed 6 or 7 inches if i remember right