I'm selling of some of the over 50+ FE and 385 series blocks, cranks and heads that I have. These are mostly stock take-outs and will need cleaned and possible machine work. The machine shop that I have used for about 15 years will bake, caustic clean and soda-blast a block for about $125. Magging and sonic checking usually run about $125. The 352's are $250, the 390's are $300, the 429 thick-webbed are $500, the 429 factory 4-bolt mains are $1500 and the D9TE's are $400. I'm not ready to sell off any 427's or 428's YET. I have lots of 2U, 3U, C4AE, 361 FT, 391 FT, 2Y's, 3T's and I think I still have a few 428 SCJ cranks. I don't want to sell off the "good stuff" yet.... no forged, stroker or LeMans yet. The heads are like the blocks, take-outs that are dirty and unchecked. I have blocks, heads and cranks that are correct starting with the 1960 models... no '58 or '59 number correct parts. If you need any of the listed parts just give me a holler and I will check and give a valid price and condition. I can take any part to my machine shop and pick up when finished as well as ship or maybe help on delivery. Thanks, Rick Please PM if any questions.
The Jalopy Journal
