Featured Threads Archive
-
Projects Rickybop's 1931 Plymouth PA Business Coupe
Hauled 'er home today.
Got going early.
Got back late.
Tired but happy.
Hang on tight.
You're comin' home with me.
Safe at home.
... -
Technical This traditional?
This caught my eye, blurring the category of traditional or not. -
Projects It’s home
Picked this up sat. New project
-
Technical Catastrophic water pump failure
Stepped on the gas yesterday and car went into passing gear. There was a loud bang and some metal came flying by. 1931 Ford with 350 Chevy. Zip’s water pump riser and FlowKooler aluminum water... -
Projects 62 Falcon drive train decision.
I recently acquired a 62 falcon in pretty good shape from my late father in law. I don't know a lot about the history of this car except someone has attempted to do some restoration prior to my... -
History Happy 70th Birthday To The Small Block Chevy!
It may have happened a few days ago but the small block Chevy is now 70 years old. Can we get (yet another) thread in honor of the millions of engines built and the most popular engine in hot... -
Technical Above and beyond is not completely dead yet
There seems to be no shortage of companies doing less and less to help us with our old parts. But Jeff at Monneyham blowers not only called while on vacation to see what I needed help with, he... -
Event Coverage Gentlemens Revival Grängesberg Sweden 2024
Going thru my photos of the summer of 24.
This event its a pre 1949 event with kustoms hotrods old racecars and motorcycles, the main event is a race.
... -
Hot Rods Finally got a hot rod!!!!!!
Been wanting a 1930's Ford coupe or two door sedan ever since I've been a member of the HAMB. Reality came last week when I got this one. I had to sell my '64... -
Hot Rods Breakfast Run
Treated the wife to breakfast today (her birthday-78) at the Rt.66 Diner in Albuquerque on Central Ave, the original Route 66. ... -
History "Stuff I flipped too Early, 40-50 years ago."
There is another thread on Cars as an Investment, made me remember some parts I bought many years ago, had to part with them to keep funds rolling in. No regrets really, but if I had them today... -
Art & Inspiration Anyone teach their wife to drive 3 on the tree?
My wife and I were planning on moving this fall, but it looks like the housing bubble has popped, and we will be here for at least 6 more months. In preparation, we had been selling off everything... -
Folks Of Interest Too bad I quit drinkin'.
21 years ago today I joined this joint. First, Thanks for all you do for all of us Ryan. Second, Thanks to all the friends I've made over the years. Third, Here's to all the past members and... -
Technical 1932 Welds
I know its probably a dumb question but I am working in a HF Steel 32 right now and got the interior gutted and was admiring the absolute beautiful welds done by the... -
Folks Of Interest Thank you Scott aka RMR&C
I want to publicly thank Scott for helping me out.
I found a flathead welder in Big Fork MT and I had to have it.
I asked Scott to pick it up for me and hold it til I had time to pick it up.
He... -
Hot Rods 54 vette strait axle surivor woken from a long slumber
So back in April at the Gopher State timing Associations 66th Annual Rod and Custom show i had run home to give a couple out of town friends a tour of my toys, when i pulled back into the show to... -
Event Coverage Dawsonville Georgia Moonshine festival
We had beautiful weather today, and lots of cool rides. Drove the Willys 80 miles each way. Post up more if you’ve got... -
Technical shorten a 32 wheelbase
Several times I have thought about the 32 side profile with the front wheels moved back. Ran across a discussion not to long ago about same and it seems I am not the only one thinking the 32 front... -
Hot Rods 40 left me stranded.
Headed for C&C at Speedway early this morning and about 20 miles from home the 40 shut off and refused to restart. Everything looks good so I'm betting on the Pertronix distributor? Only the... -
Technical Pinion damage - usable or not
I dismantled the rear axle ( 1948 banjo) and noticed surface damage on the pinion teeth, plus one place with corrosion. it does not seem to be deeply corroded, but the surface is no longer as...
Page 1 of 917