Register now to get rid of these ads!

///////art Challenge#6: 02-08-08\\\\\\\

Discussion in 'The Hokey Ass Message Board' started by Jigger, Feb 8, 2008.

?

Who's the big winner???

Poll closed Feb 25, 2008.
  1. sgtlethargic

    3 vote(s)
    6.4%
  2. BoneHeadcustomZ

    0 vote(s)
    0.0%
  3. fortypickup

    9 vote(s)
    19.1%
  4. twochops

    0 vote(s)
    0.0%
  5. 27T

    0 vote(s)
    0.0%
  6. Fowler5

    1 vote(s)
    2.1%
  7. GaryC.

    22 vote(s)
    46.8%
  8. Jigger

    1 vote(s)
    2.1%
  9. ALLEYOOP

    0 vote(s)
    0.0%
  10. Gaters

    0 vote(s)
    0.0%
  11. 02-18-2008, 11:56 PM

    1 vote(s)
    2.1%
  12. Pablo

    0 vote(s)
    0.0%
  13. baader

    0 vote(s)
    0.0%
  14. Rem

    0 vote(s)
    0.0%
  15. nate

    2 vote(s)
    4.3%
  16. CQQLSPENCER

    0 vote(s)
    0.0%
  17. Clark Kustoms

    8 vote(s)
    17.0%
  18. lesabre59

    0 vote(s)
    0.0%
  1. GaryC.
    Joined: Mar 24, 2007
    Posts: 1,538

    GaryC.
    Member

    FlyingPolock...
    Hey man,; great to have you back!... and thanks!
    I'm loving the butterscoth paint job!
     
  2. Flyin' P, you're embarrasing me!

    Thanks for chiming in Nate. I agree, this is not the place to debate
    tools and techniques. Criticims and comments are encouraged but the real place to share your oppinion is in your vote. Let's steer clear of who uses what on the challenge.

    Oh crap... I'd better draw something too. (that or you can vote on the Zipper's sketch)
     
  3. Rem
    Joined: Mar 6, 2006
    Posts: 1,256

    Rem
    Member

    Right, it's late here and I had never intended spending 3 1/2 hrs playing with PSP6 tonight, but anyway, here's my first attempt at the Panel. I think you can probably see where my influence came from with the extended grille bars down the hood side. The marker lights have been shaved from the top of the headlamp housings and the headlamps frenched to remove that bug-eyed look. The back has been lowered an inch and a half more than the front.
     

    Attached Files:

  4. Rem
    Joined: Mar 6, 2006
    Posts: 1,256

    Rem
    Member

    Now you didn't think that took 3 1/2hrs, did you? No, although I don't have anything against unpainted rides, if I could afford it or had the ability then I would go for the best paint and trim I could afford - this is a kustom, after all. So the trim has been chromed and a set of '37 DeSoto bumpers added (and if anyone has an affordable pair, I would like some, please), along with some flipper caps. I think it should be a much darker red than this - as dark as possible without being brown or black.
     

    Attached Files:

  5. Rem
    Joined: Mar 6, 2006
    Posts: 1,256

    Rem
    Member

    Now I am not that good at sheetmetal, so I could well have screwed up the chop on those big flat sides, in which case I might well just take it to its logical conclusion and cut the top off and fit a Carson-style one. I'm not sure if the side window/Landau look works or not - I'll see tomorrow when I'm more awake.

    Thank you and good night!
     

    Attached Files:

  6. First, I want to thank Jigger, awesome job on this challenge. It was fun to go at it from the other side

    It's funny, a friend of mine was selling his 46 chevy a couple weeks ago and I was real close to buying it.. I really like the style, I don't think they're ugly at all.. kind of classy really, for a pickup.

    Here's mine.. nothing radical, just a healthy drop :cool:

    [​IMG]
     
  7. fortypickup
    Joined: Aug 2, 2007
    Posts: 1,780

    fortypickup
    Member
    from Nebraska

    Welcome back to the Hunt, Nate! :)
     
  8. "The Gauntlet" has been thrown down:

    [​IMG]
     
  9. CQQLSPENCER
    Joined: May 29, 2006
    Posts: 67

    CQQLSPENCER
    Member
    from Monroe, IA

    I realy liked this challenge you guys have some great stuff!:D

    On the 4x4 it has a shortened box and a custom dualy frame

    Orange shop truck has 4" chop, 5" shortened Box, custom upper grille and slammed.

    the scetch(didn't have time for color but imagine baby blue) is a shortened panel sliced and diced.:p

    Can't waite for the next one!
     

    Attached Files:

  10. One more day.......
     
  11. The last nail in the coffin:

    [​IMG]
     
  12. Here's another from me...

    Channeled, sectioned, shortened, slammed.........

    [​IMG]
     
  13. Clark Kustoms
    Joined: Oct 24, 2006
    Posts: 62

    Clark Kustoms
    Member
    from las vegas

    I put on a COE front end then used a 4 wheel drive tranfer case for a
    rear mounted engine. Crazy? yes. Turn heads? yes. click them.
     

    Attached Files:

  14. flyingpolock
    Joined: Apr 7, 2005
    Posts: 459

    flyingpolock
    Member
    from PHX

    That RULES.
    Killer work.... and man, I checked out your site.... great stuff!!
     
  15. Time's running out.
    At this time, posts will be allowed until 12 Midnight LCT (Left Coast Time.) (Hey, if they can mess with A.D. and B.C. I can sure as hell mess with their Time zones!)
    The voting will begin tomorrow A.M.. (Unless Nate or I must revise these times.)
    Get at it gang.
     
  16. BUMP, BUMP, BUMP! Is there anybody------out there?
     
  17. Bump! (What was that?!!)
     
  18. fortypickup
    Joined: Aug 2, 2007
    Posts: 1,780

    fortypickup
    Member
    from Nebraska

    Jigger was that one of those things that goes "Bump in the night"?
     
  19. THE POLLS ARE OPEN!!!
    There were some outstanding entries on this one. There were two whose creators requested not be entered for judging that , while facing stiff competition, could have stolen the show. I think all artists goods should become fair game regardless of modesty.......
    I have no idea what the prize will be so be patient.
     
  20. flyingpolock
    Joined: Apr 7, 2005
    Posts: 459

    flyingpolock
    Member
    from PHX

    ...hey, it's Saturday. This Pole is closed (working anyway...)

    ....I'll just sit over here and be quiet now.
     
  21. I don't get it. Shouldn't you be in bed???

    VOTE!

    Pole? OOOOOOHHH! O.K., .............now I get it; and so I fixed it.
     
  22. THERE'S A PROBLEM ON THE POLL...
    lockwoodkustoms
    NAME WASN'T ENTERED PROPERLY!
    02-18-2008, 11:56 PM #74 IS WHAT WAS ENTERED!
    I THINK I GOOFED WHEN I HIGHLIGHTED AND DRAGGED THE NAME OVER SO PLEASE GIVE HIM SOME CONSIDERATION
    Sorry about the bone headedness lockwoodkustoms.
     
  23. Rem
    Joined: Mar 6, 2006
    Posts: 1,256

    Rem
    Member

    Come on guys, only 9 votes so far. And none for my efforts!

    Or could I have voted for myself? :)
     
  24. lockwoodkustoms
    Joined: Dec 22, 2005
    Posts: 3,910

    lockwoodkustoms
    Member

  25. Scotty Harrod
    Joined: Feb 19, 2008
    Posts: 22

    Scotty Harrod
    Member

    Sorry I'm Late but here's my Sedan Delivery version....
    [​IMG]
    Scotty.
     
  26. hey sorry I'm late also- got slammed w/work this week, and fell behind (ahem) Thanks, Abe.


    [​IMG]
     
  27. SPEED BUMP!!!

    I hate them! Nice art 58fridge100. You too Scotty Harrod

    Sorry we missed you. I suppose we still need to iron things out a bit.
     
  28. fortypickup
    Joined: Aug 2, 2007
    Posts: 1,780

    fortypickup
    Member
    from Nebraska

    Thats friggin cool! Nice work! Right-click-save!
     
  29. A vote for me is a vote for real change. Vote early and vote often. Please see all of my entries. Vote for one or vote for all.

    Thanks,
    Kurt
     

Share This Page

Register now to get rid of these ads!

Archive

Copyright © 1995-2021 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.