I could use some leads besides Ecklers and Hubbards to obtain some body tin and stainless trim for a 60 Impala. Thanks to any answers in advance.
might be some leads over on the 348-409 forum. Lots of 58-64 Chev's over there and fellas that are always parting out stuff. Could try Show Cars as well.
I'm in Kansas City this morn...guy here has a '60 Chevy grille in good shape if you need that..plus a '60 Chevy radio... R-
Thanks for the reply's. car is in NH stashed for the winter. Mainly need to get some of the trim and the pan behind the rear bumper.
Guy here in KC also told me he had the rear pan..said it's dented but no rust thru... shoot me a PM... R-
Try Cars.inc in Michigan. Found the best deal on tin for my ´58 with them a couple of years ago. All 18 gauge, bare steel pans made in the US. They appear to stock a lot of tin for ´59/60s, as well. Not affiliated with them in any way. Just found the best deal with them. Personally, I wouldn´t buy anything thinner than (factory-stock -ecquivalent) 18 ga pans for a car like this.