Register now to get rid of these ads!

Customs 53 Pontiac kustom build Sins or bust

Discussion in 'The Hokey Ass Message Board' started by Taildraggin, Nov 28, 2008.

  1. Had this car for a few years now. it was already chopped when I had it but never finished.
    I painted it in a mat finish until I had time do redo it right.
    I swapped out the old straight 8 about a year after i had it.
    I started the rebuild at the end of summer 2007 and I'm planning to finish it for the Sins show in Antwerp at the end of April next year.

    This is how it was befor the teardown
    [​IMG]

    Got my son and his mate involved with dissasembly

    [​IMG]
    [​IMG]

    [​IMG]

    The plan was to take the body off and build up the chassie getting rid of the rear leaf springs and setting it up on air bags and 4 bar.

    First off with the body:D

    [​IMG]

    [​IMG]
    [​IMG]

    [​IMG]
     
    Last edited: Nov 29, 2008
  2. Once the body was off and out of the way it was time to start the suspension mods
    [​IMG]

    Axle was temp welded in place
    [​IMG]

    Then the springs removed

    [​IMG]

    Lower bars were made up next I used the front spring hanger to mount it to the chassie and boxed the rear part of the chassie

    [​IMG]
    [​IMG]

    Top bars
    [​IMG]
     
  3. [​IMG]

    [​IMG]

    Air bags and exhausts fitted
    [​IMG]

    [​IMG]
    [​IMG]
     
  4. captainjunk#2
    Joined: Mar 13, 2008
    Posts: 4,420

    captainjunk#2
    Member

    great job , i enjoyed the photos , nice looking car what color will it be when the body work is done ?
     

  5. Goldrush Gasser
    Joined: Apr 29, 2008
    Posts: 92

    Goldrush Gasser
    Member
    from norfolk uk

    Well done sir there is quite a few of us going sins or bust lets hope we make it, the Scrapers cc do one hell of a show
     
  6. Yep looking forward to it
    Got to get it finished cause i'm fed up of getting wet in the roadster
     
  7. ken1939
    Joined: Jul 5, 2008
    Posts: 1,558

    ken1939

    Nice work, glad to see someone else try to build a car in a phone booth. :)
    My kind of body stands too! Been there twice!

    Nice work on the roller, will look forward to the dropdown and paint pics
     
  8. T.W.Dustin
    Joined: Nov 18, 2008
    Posts: 883

    T.W.Dustin
    Member

    Nice work and great way to get the kids involved!! :cool:
     
  9. Next back on with the body
    [​IMG]

    Cut out the old trunk floor because i wanted to raise the fuel tank so when its lowered I won't have any clearance problems

    [​IMG]
    New floor and fuel tank hangers made
    [​IMG]
    [​IMG]
    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]
    [​IMG]

    Had to modify the rear floor pan and prop tunnel for clearance
    [​IMG]

    [​IMG]

    [​IMG]
     
  10. Gotzy
    Joined: May 21, 2005
    Posts: 494

    Gotzy
    Member

    Looking good mate, you never did respond to my e-mail about grilles, any designs made yet?
     
  11. Bit of repair work on the front floorpan
    [​IMG]

    [​IMG]
     
  12. Not decided yet, getting all the other body mods done first
     
  13. Started stripping the paint on the body and foound a few horrors,
    The rear quarters on both sides were bashed up pretty bad, with poor repairs with lots of bondo:mad:
    [​IMG]
    [​IMG]
    Someone had drilled lots of holes to try and pull the dents out.
    I cut the inner panel out to get better access to try and repair it
    [​IMG]
    [​IMG]
     
  14. Next the rear window. Just had a piece of perspex in there before, I got hold of a 46 Ford rear screen and put that in
    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]
     
  15. Engine , trans and firewall painted kandy apple red

    [​IMG]
    [​IMG]
    [​IMG]

    The headers the one side were off the shelf s/steel block huggers
    [​IMG]

    the drivers side would not clear the steering box so I cut out a S/Steel header flange with the plasma cutter bought some 1 1/2" s/steel bends and made my own header

    [​IMG]
    put tubes over the spark plugs so I new I could get them out when finished.
    [​IMG]
    [​IMG]

    [​IMG]
    [​IMG]

    This is how it is to date
    Lots to do:D
    [​IMG]
     
  16. VNTGE41
    Joined: Mar 4, 2007
    Posts: 739

    VNTGE41
    Member
    from l.a.

    show a pic of it with the bags all the way down. nice work, looks like its going to be badass
     
  17. flamedabone
    Joined: Aug 3, 2001
    Posts: 5,457

    flamedabone
    ALLIANCE MEMBER

    Damn fine work. Really dig teh engine/firewall color.

    -Abone.
     
  18. Can't wait to see it done!
     
  19. skyrodder
    Joined: May 7, 2005
    Posts: 1,925

    skyrodder
    Member

  20. Tony
    Joined: Dec 3, 2002
    Posts: 7,350

    Tony
    Member

    Very nice work..
    LOVE that color too!!
     
  21. Very nice work. Really like the rear window. Wild color too. Going to paint the whole car similar? Keep us posted.
     
  22. vdubjim
    Joined: Nov 11, 2008
    Posts: 107

    vdubjim
    Member
    from OKC

    freaking awesome!
     
  23. nice work. Dig the red. It'll look good.
     
  24. Yep the whole car will be painted that colour, its HOK Kandy apple red. I have put a bit of flake on the dash.
     
  25. Goldrush Gasser
    Joined: Apr 29, 2008
    Posts: 92

    Goldrush Gasser
    Member
    from norfolk uk

  26. Gotzy
    Joined: May 21, 2005
    Posts: 494

    Gotzy
    Member

    I know I was winding you up at the Hayride about the paint but it's going to look very nice in that colour!!

    Cool header work as well, so what's next on the list?
     
  27. chevsotolac
    Joined: Aug 14, 2005
    Posts: 2,002

    chevsotolac
    Member

    I have a 54 pontiac grille and misc. trim for sale......check out my webshot page for pictures......stan
     
    Last edited: Nov 29, 2008
  28. Too much:D

    Both doors have seperated from the inner skin at the bottom so lots of repair work there, hoping to finish the doors this weekend
     
  29. sololobo
    Joined: Aug 23, 2006
    Posts: 8,378

    sololobo
    Member

    Holy hayride, man you have done a super job on this baby!! Good to see the young lads out there twisting the tools. I love that tin indian body style, not a lot of the 2-dr post cars avalilable. Thanx for the great details on the build!! Bloody good!!~Sololobo~
     
  30. poorboy
    Joined: Feb 8, 2003
    Posts: 1,467

    poorboy
    Member

    awesome work man, you're taking a cool car and making it ten times better! that candy red looks bitchin'
     

Share This Page

Register now to get rid of these ads!

Archive

Copyright © 1995-2021 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.