Its time to let this go in favor of building something else. You can own a turn-key traditional hot rod with a cool engine for less thank 20k! Here are some specs: Drivetrain: -Ford 292 Y block +.080" -Mild Cam, Flat top pistons, Pressurized Rockers, Mellings oil pump -ECZ heads ported and flowed -Mallory Dual point distributor -6 Holley 94 Carbs on Ansen Y adapters -Custom 2x2 Headers Ceracoted (good to 1500 degrees) -Truck bell housing with hydraulic slave cylinder, Diaphragm clutch -3 speed fully synchro trans -Banjo rear end with open drive conversion -Fully boxed and braced Model a frame -F100 Brakes, Ford F1 cross steer box Body: -Rust free (there are ZERO patch panels) Chopped 5-3/4" Channeled 2" -Header panel raised for more vision, new wood kit and vinyl top. Minimal interior -50 Chevy Dash Sectioned and modified to fit. Chrome craft bar stool seats This car runs drives and stops well. I am 6'4" and i built it for myself so a larger person will fit in it or move the seats up. Let me know if you have questions. I will entertain trades of a coupe body or an abandoned project coupe. $19,900 Six16-8two1-49nine3
The Jalopy Journal
