I bought a “complete” fender bolt set and I’m confused on where things go. There are carbon bolts and stainless?The kit has odd numbers on some things and missing bits and things are not matching up. I also bought a front fender bracket bolt kit and that’s worse..... odd number of bolts with 3 miscellaneous extras and nuts that go to bolts that didn’t come with the kit..... any help figuring this out would be appreciated. I’ve searched here and the ford barn with not much luck Sent from my iPhone using The H.A.M.B. mobile app
The eight carriage bolts, bolt your fenders to the the running boards, the bolts and nuts, [twelve], bolt your front fenders to the aprons. The four flat carriage bolts are for the apron to the frame. The six 3/8s bolts fine thread, bolt your front fender braces to the frame. The four long carriage bolts are for your head- light bar. The nuts and washers are for the rear fenders. There should be four 1/4 inch carriage bolts for the fenders to the braces, and bolts and nuts for the rear fender braces to the frame. That should get you started.