The Jalopy Journal
Motor mount that goes on the bottom of the waterpump on the 241 and 270 dodge hemi and poly engines
The bare metal one has a repair done as seen in the pictures, a few minor dings, overall these are in good shape. I have other Dodge and Chrysler...
I have 16 rods that appear to be refurbished, 90 per set of 8. I have two sets of 276 heads, a front cover and a few other Desoto hemi parts.
6 intake valves which are approximately 1.81" heads and 7 exhaust valves which are approximately 1.5" heads and the associated springs and...
See pictures. I have other Chrysler, Dodge and Desoto early hemi parts and engines for sale
4 bolt exhaust manifolds. I would consider trades for Chrysler or dodge early hemi parts or engines. I have other Chrysler and Dodge early hemi...
1956 354 dual quad intake, fits 331, 354, 392 hemis. I have other 331 hemi, 354 hemi, 392 hemi engines and parts for sale. I also have Dodge...
900 without viewing covers, 1200 with valve covers. Std bore, pistons removed. I can ship via Fastenal Colorado and East for 150 to 250. I can...
This Chrysler Early Hemi Hilborn Injector Model #331-CH-8 with Serial #424 was originally being built for a T.R.O.G (The Race Of Gentlemen - West...
$400 Block, crank, oil pan, 2brl intake and poly heads if you want them.
1957 392 standard bore engine. Unfortunately one cylinder has a crack and would need a sleeve (see the second picture). I would consider selling...
Red Ram Hemi valve covers. $330 plus shipping. I have several 241/270/325 dodge early Hemi engines and parts for sale as well as 354 hemis
Early Hemi log intake for 331 Hemi or 354 Hemi or 392 Hemi. It has a spot for a water port however it is not cut through and could be easily...
354 block with main caps, crank, rockers, oil pan and heads. Block appears to be around 25 over....appears maybe they started to bore it out to...
This is a 259 block with 270 hemi heads. I have a 2 brl intake I will include $700 without valve covers. Valve covers available at an extra...
$75 for the rusty one on left with std mains and rods. $280 for the one on the right with 10 over mains and 20 over rods. Shipping paid by buyer
$250 plus shipping. I have several 241/270/325 engines and parts. Let me know what you need.
331 Hemi 354 Hemi or 392 Hemi dual quad intake. It appears to be a Weiand 7263 which had the top shaved and a modern carb adapter added [ATTACH]...
Nice set. Message and I can send more pictures
has been hot tanked an checked for cracks by the prior owner. I can ship via Fastenal or SpeeDee. I also have a 276 block and heads, another 330...
259 (VT338 engine ID) engine with 270 hemi heads (1554132 casting) and std bore high compression pistons (Forged True brand based on the marking)....
SOLD!!!
276 hemi (30 over I think)--- cylinders look good -no ridge. See pictures. If interested I can send more. parts prices below. I also have a 330...
Sold!!!!!!
I need to rebuild my Powerflite transmission mounted behind my 291, but am also thinking about swapping it out. The key items that I want to...
Block casting 1635729 - 1956 which has the engine mounts on the side of the block....hard to find for the low decks. The bore is 3.655" so it...
Bored 60 over some time ago and then stored an not finished near as I can tell. The engine ID startswith D44. Appears to have high compression...
I can send pictures if interested
cam core that would need a regrind - see pictures. would consider trades for dodge 315/325 poly or hemi parts [ATTACH]
From a KD500 engine. If interested email and I can send a picture. I have three 315/325 engines that I have extra parts from. Let me know what...
Separate names with a comma.