The Jalopy Journal
I want to put disc brakes on my 50 Ford and am considering moving the master cylinder to the firewall. Has anybody done that, and what kit did you...
Need 11", 2.5 deep front drums. Anybody now of an economical solution? Will '60 Galaxy drums work? Seems you add the 1956 Fairlane, they assume...
Anyone have a tip on how to get that f'ing spring anchored between the shoes without damage to car or a hernia to one's self?
hey all, I bought the speedway motors bracket to move my booster up onto the firewall in place of the "inspection cover", and if any of you have...
Wilwood Brake Calipers, left and right side, new in the box. Wilwood part number 120-0454-R/H and 120-0454-L/H. These are replacement calipers...
i am putting steering in my 34. I have a small block/350 in it now. My steering is coming front the front via a Heigts cross member and there non...
... from a Disc/Drum to Disc/Disc? I had read somewhere that the only difference is a valve that you either add or remove. Any info would be...
Looking for s10 t5 transmission adapter to stock 4 cyl engine, looking for u joint yoke. adapter for model A stock rear axel , does any one make...
I have access to a set of F3 or F4 backing plates (8 lugs) currently mounted to their original front axle. Can these be used in the same manner...
OK here's the deal conventional 4 wheel manual dual master cyl. drum brakes I'm installing a Hurst Roll Control in the front brake circuit....
I put a 9 inch rear end in my truck and I'm working on routing the brake lines. I ran into a dilemma when I realized that the breather hole on the...
Ford F1 backing plate. Has some pitting but will clean up fine for a driver.. SOLD!! Thank you.
(5) cast aluminium Ford Brake scoops 4 Briz Cool and 1 no name... Great shape.
So about a year and half ago give or take i started pestering you guys with all sorts of questions about a front axle swap to put disc brakes on...
I must preface, I had a mental block and didn't quite understand how HAMB itemizes things, and accidentally posted the previous thread under...
Does anyone have a part number or car specific application for a Ford, manual dual drum/drum master cylinder with internal 10 psi check valves...
Has anyone done a disc brake conversion to a 1951 olds rocket 88? There are no aftermarket parts for a 51. But it looks similar to 53 chevy...
hey guys. I’m new here and hoping to get a little help. It’s my first build and I picked up a 1948 international kB3. I’m looking to find some...
I've been reading posts on here for years, but finally needed help and joined. My most recent version of my 31 Model A was started about 35 years...
I've been getting a lot of calls recently about how to identify what size fittings to use with aftermarket parts, so I thought I'd share this...
Hello everyone! My name is Todd and I own TheStopShop, which specializes in street rod and muscle car brake systems. We are a new advertiser here...
Soldpair of early Halibrand singles spot front calipers complete but will need rebuilt .haven't been grinded to death and will clean up nice....
42-48 backing plate (1) $30 plus shipping[ATTACH] [ATTACH] 1935-1936 bumper A-bar, driver quality. $30 plus shipping. [ATTACH] Model-A...
[ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] This is a set of 45 fin front aluminum brake drums off of an early 60's Buick. Condition is good...
Hi. Im new here and thanks for the membership of this cool site. 4 years ago my 63.5 Ford Galaxie got discbrakes in all 4 corners. The brakes...
[ATTACH] Okay has anyone used this setup? It's for mid to late 40's chevy passenger car, and if so is it a straight install or are you cutting the...
Hello, my name is Jeff. I recently purchased a 1960 Plymouth Fury. After removing the rear wheels it became apparent that a previous owner pried...
Brand new front Disc Brake rotor "kit" for Mustang II front suspension. Enables you to run a "Big Car" or truck bolt pattern with your M II front...
Good Thursday afternoon! My dad and I are building a '28 A roadster on a Pete and Jakes Chassis. We are using a dropped axle with super bell...
Hey, Guys... just getting my baby, "The Judge" on the road, and have run into a problem that I'm concerned about. I figured that the brakes would...
Separate names with a comma.
The Jalopy Journal
