The Jalopy Journal
I have 20 bolts for assembling axle bells to banjo center section. These came out of a unit I disassembled for quick change buildup. Believe...
Excellent V8 Ford 11 tooth spider gears (4) as shown, clean and no corrosion. These are needed if you're setting up a quick change.[ATTACH] Buyer...
I've searched for an answer to this and contacted everyone I can think of about this without any luck. I feel I must have just missed seeing it...
SOLD. 1939 Ford banjo steering wheel. Bob drake reproduction. Very nice quality. Includes complete functional horn rod and all lower retainer...
Hi, I am new to the forum and building a traditional flat head belly tank lakester from scratch. I am not planning to go especially fast, it's...
Hello, I need help.. I tried searching but no luck. How do you remove the bearing inside the torque tube on a Model A? I have the torque off. It...
For sale is a complete 1934 Ford Banjo rear. It has been converted to juice brakes. Includes spring, banjo, torque tube, brakes and drums. I'm...
Im currently getting ready to mock up my 40 banjo in my model A chassis. I will need to shorten my torque tube and driveshaft to fit behind my 39...
My friend just picked up what he was told was a 39 ford banjo. However it’s much different than mine. His radius rods are much shorter, the torque...
Picked up my 40 banjo rear and one axle end has damaged threads, is there anyway to repair this? thanks Chris
My 40 banjo axles seem to have a lot of play in the axle now that the drum and hub is off. I’m new to these diffs and am looking for advice is...
I have a vision in my head of what a period 1949 hot rod that was daily driven, but Bonneville bound could have ran as a rear axle. I want to be...
I made this video for my build thread but thought I would share here too. If someone is trying learn about banjos rear ends it would be hard to...
Pulled the rear out of my '39 Standard to put the rebuilt trans in, & decided to do some work on it while it was out. So..... Changing to tube...
SOLD!! Up for sale is a complete set of 20 original Ford banjo rear end bolts. These are the bolts with the special thread that properly seals...
I'm in need of a local machine shop that can turn down an inner roller bearing race and press a repair sleeve on a '46 ford truck banjo. The...
This will be my first official post. I have a question. I am starting my 31 Ford Roadster build. I have a 1948 Columbia 2 speed axle. I want to...
Sold!! Up for sale is a set of Ford banjo housings/bells from a 1947 Ford. These will work on 1942-1948 banjos. They are in good shape, with...
Good shape. Some wear. I lightly polished wheel bearing surfaces. Bearings spin smoothly, gear pattern normal, keyways good, tapers good....
Looking for a juice brake rear end for my Model A roadster project. I'm thinking that a rear end swap might be more cost effective than modifying...
Not the sort of thing you're likely to find again. All old chrome and ready to run. I "censored" the steering wheel since it's long gone, but the...
Sold 9T / 34T 3.78 Ring and Pinion from a 1940 Ford axle. Teeth are in reasonably good condition. New in the can pinion bearing included....
Lincoln Hypoud Banjo Rear End with Lincoln hydrolic brakes and brake drums backing plates and torque tube. I obtained this when I purchased a 1932...
shown is two different style ladder bars I can make. Show is the 36" set. I can go from 32 to 40 inch on length. What you see is the kit. $290...
I have a full frame from a 1930 Ford Model A. Includes the rear bumper that was cut off the frame, but is complete. Could be welded back to the...
I'm having my 8BA rebuilt to mostly stock here in Burbank, and I want to run a banjo rear end behind it. I know that finding the 41 and up open...
I pulled the rear hub off of my 1940 Standard and the drum lining and shoes are covered in axle oil. The last thing I want to do is replace the...
I have a qc lower shaft , in great shape with gear marked . 12 . 5 -28T 1.43 . It's 19-5/16 overall length ( not including the bolt threaded into...
I need to make room for business items in the shop... So this needs a home. 1930 Chevy frame 235 Chevy six BW T-5 trans with new clutch... 1928...
Axles are in VGC. Key ways in perfect shape. Axle teeth in great shape. Differential is same condition. Rear was stored indoors. Teeth wear looks...
Separate names with a comma.
The Jalopy Journal
