The Jalopy Journal
Tanks Inc 16 gallon, 34 ford, fuel tank. Never had fuel in it. Cut for a quick change rear end and professionally welded and tested. Also has...
just bought a 34 ford tudor. need a grille shell thinking of fiberglass what does everyone recommend?
[ATTACH] [ATTACH] [ATTACH] [ATTACH] 1934 Ford stock front axle with unsplit wishbone and spring perches. $300SOLD 1932 Ford split wishbones with...
1933-34 FORD FRAME. decent shape overall, frame has not been patched or any rot holes.has one noticeable rip on end of driver's front frame...
I’m building a old school 34 Fordor and could use some help. I know I need some help and guidance in a few areas. I’m going with a small block,...
34 Heavy truck, rust free, loading available. Kansas title in my name. Located SW KS[ATTACH]
I've got a '34 Ford Frame Roller that's in decent shape. Great news is that the frame is very straight. Some pitted metal, but I've done a okay...
While surfing online for videos of Lions Dragstrip I found these clips from Pomona with "very" low view counts :eek: which I'm sure you all will...
Front bumper only. Has been modified. Ends were trimmed off and smoothed to fit a 39 Ford. Bolts are 31” center to center. Pickup or can ship for...
Hello, just bought a 34 Ford Mack Hils unassembled Bed. Anyone have a build thread on this bed, or some bed pics that I could use as a template?...
NEW LOWER PRICE ON ALL PARTS OR WILL SELL PARTS INDIVIDUALLY. 1933 or 1934 Ford frame with front and rear suspension. Tube axle with 4 bars,...
here's some pics of an original trunk tool box for the coupes and roadsters. hope the dimensions are clear enough to figger it out[ATTACH] the...
i need to do something to get rid of the "tin can" effect inside the doors on my 34 coupe. i've read dozens of old posts, nothing specific to the...
i am getting ready to wire up my vintage signal stat 700, 5 wire switch by using the diagram posted here many times which uses 4 relays so you can...
hi, i am looking for the measurements of the wood that goes under the bottom springs. i have the back, sides, original spring and a good pan, but...
Hi again! I was checking out a short film from 1946 titled Traffic with the Devil; while grabbing stills from it I spotted this little gem:...
[ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] Complete running and driving restored 34 Roadster being disassembled and sold for parts....
This is a '34 Ford 3 window project. The cowl and windshield area are very good shape. The frame is in great shape. The body was 2 bodies welded...
To re-cap, I am building a Speed 33 roadster. As such it is not a traditional hot-rod so I don't have a traditional build thread, just a...
Test fitting
Boxed
***1934 FORD 3 WINDOW COUPE ALL STEEL UNCHOPPED ROLLER*** Folks -what we have here is a very solid Henry Body coupe. This is a roller however see...
1932- 34 Ford Parts 1. Single 32 5w and fordor seat track. $40[ATTACH] 2. 32 pitman arm. Needs a bit of straightening. $75 [ATTACH] 3....
Cleaning up the frame before boxing plates go on.
34 pickup running
Finally found a 34
Sold thanks. 1934 ford grill for sale. Some pitting on a few spots, but overall descent shape. Asking $500 plus shipping. Call or text,...
Separate names with a comma.
The Jalopy Journal
