The Jalopy Journal
[ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH]...
⭐️ SOLD BY AMANDA⭐️⭐️ $13,000 1962 Studebaker Lark Cruiser V-8 Automatic with very low original mileage. Recently completed major mechanical...
Does anyone have the July 1962 Car Craft handy that they can scan? I’d be cool if you could scan the article about this T coupe built by Don...
This model a is a local hot Rod where I'm from. The owners told me this car was built sometime in the early 60s. Here are the pictures I took of...
Full inner and outer passenger side quarter panel from a 1962 Chevrolet full size wagon. Cut at or past factory seams so the structure could be...
Full inner and outer drivers side quarter panel from a 1962 Chevrolet full size wagon. Cut at or past factory seams so the structure could be...
SOLD Four wheels with the GM 65 stamp and NT stamp. Tires hold air but I wouldn't use them as daily drivers. In good original shape, come and get...
First time posting, thank you all in advance! This first post will be longer than most, as there is a lot of back story up until current day. My...
1962 Chevy big back window. Pretty good shape! Has some rot in the lower front fenders, but that looks to be the worst of it. No motor. Comes with...
I am picking up from this thread: https://www.jalopyjournal.com/forum/threads/292-y-block-valve-spring-removal.1245880/ with a title that is more...
Does anyone have any recommendations for a place to buy a transmission rebuild kit for my 1962 Ford 259 manual 3-speed? It came out of my 1962...
I am trying to get the fuel guage sender wire off the sender unit at the tank - and it does not want to let go. Where is it supposed to be...
What does the community think about using concrete blocks as a platform for my jack stands to give me an extra 8~12 inches of space? I am...
Working on a 1962 Mercury Monterey with a 292 y-block. I have the intake manifold off, but I twised the head off of one of the bolts holding the...
I am working on a 62 Mercury Monterey 4 door sedan. I would like some instructions for removing the rear seat. I thought that would be easy - I...
Well it’s been awhile since I’ve been here. And despite what my screen name says, I’m no longer a “CollegeKid”. I recently stumbled onto a...
Got a nice set of driver quality 62 Caddy caps just taking up space, decided not to use them I didn't care about the centers when I bought them...
62 Mercury Monterey 4dr hardtop parts. Pretty rust free az car I am using as a parts car. I will be taking the car apart in the next couple...
1964 Chevrolet Malibu wagon Original Portland car. Documentation of sales from dealership. 283/powerglide, 600 Edelbrock carb, power steering,...
Hey y'all! I just wanted to show off my 62 Bel Air 409 wagon. I picked it up last week. It has a '65 409/ M21 4spd and 4:10 rear end. Radio and...
So Im Looking To Drop My 62 C10. LWB It Is Currently A Torsion Bar Front. My Main Question Is How Low Can I Go In The Rear? Im Not Going To "C"...
*** SOLD PENDING PAYMENT *** 1962 Ford Unibody Shorty pickup Custom Cab. Came from a local wrecking Yard. Bill of sale only. This's a project. Has...
1962 impala wagon SBC, runs good, new exhaust, clean rust free floor, original seat covers need replaced. Car has some custom body changes; shaved...
Does anyone happen to have a part number for the upper conrtrol arm (left or right) for a '62 Buick Special? (I assume skylarks of the eara might...
I am selling a Cadillac 390. Pulled from a running donor ‘62 Eldorado about 2 years ago. I had aspirations of freshening it up and dropping it...
1961-1966 Hood Emblem. I only opened the box to take a photo. Comes with hardware. Nothing wrong with it. $48 with shipping inside the US; others...
Hey All, I bought my husband a 62 Dodge Phoenix last week and I am missing the Dodge Badges from the bonnet Does anyone know where I could source...
35,339 actual miles. Correct Roman Red exterior with red and ivory vinyl rare bucket seats. Paint is a few years old, fresh wet sand and polish....
FACTORY A/C. POWER STEERING, POWER BRAKES, POWER SEAT, POWER WINDOWS, 390 CU. IN. AUTOMATIC, NEEDS BRAKE WORK, SUSPENSION WORK, RUNS, DRIVES, SOME...
This is a running Buick Nailhead pulled from a 65k mile project car. Not going to use for other projects and would like it gone. $1200 and will...
Separate names with a comma.
The Jalopy Journal
