The Jalopy Journal
Chop it, put it on '32 rails, big and littles, and a small block ford, with juice brakes,'32 grille shell, drop axle, etc... Posted using the...
Model a banger
What would it take to put a modern day turbo and install it on a 4 banger?
sweet thank you very much for your help.
I switched it over to 12 volt.
can i just buy a fuse panel with 6 fuse push ins? Thanks for all the help. I am only 17 and don't know wiring that well.
to make the block off plate you would just make the pattern and weld it closed. Right?
I want to wire my model a from scratch. Will I need to use the bulb that originally connects to the steering box or can I just run a fuse box?
and this http://lbcunited.com/earlyford2/product_info.php/cPath/94_194/products_id/2698
and this http://lbcunited.com/earlyford2/product_info.php/cPath/94_194/products_id/1473
So this is what i need. heres a link...
Btt
I have a 1930 Model A coupe. The whole car is stock and still has the banger. I want to get rid of the bulb at the end of the steering box and run...
thanks everybody for the help
No!
My model a 2 tooth steering box seems to leak steering fluid. I just rebuilt it and tighten all the bolts and it leaks like crazy! any ideas or help?
cyclone.
don't chop it.
i just went through all 39 pages. I am speechless. This is unbelievable. The skill you have an the attention to detail is jaw-dropping. I only...
What kind of modifications are needed to make my model a seat go all the way back and get rid of the package tray, so the seat rests up against...
thank you all so very much. this helps out a lot
okay. I chose to do the model a because I just finished mine and am going to use that for my product to go with my project.
Hey Hambers! I am a senior in high school and am doing my senior/research paper on the ford model a. I am going to describe how it set a standard...
Does anybody know anything and everything about a vortex dual updraft manifold for a 4 banger on a model a. What the jets on my carbs are supposed...
thanks fellas
Does anybody know if there is a difference betwwen a set of 1930 Model A running boards and 1931 Model A running boards. I need to replace the...
I am 17 with a '30 Model A coupe and a 1953 Ford f-100
go traditional and run 7.50x16 in rear and 5.25x16 in the front
so the lever on the horn rod is like my light switch? you just turn it and they turn either off and on.
Separate names with a comma.
The Jalopy Journal
