The Jalopy Journal
a way out thought on the camless concept is what was developed allready by using a number of nozzles to shoot/inject air into combustion chamber...
you should mock it up on the head, and put some red felt tip color on the tip of the valve, then rotate engine with the valvetrain/pushrods /...
can you get some more pictures...? and a good photo of the dataplate and the small number of the model that is stamped at the bottom. If it is...
sounds similar to when on seperate occasions... .....my two ring fingers now MATCH... courtesy of a 110 ton niagra press brake...2 X 8 foot...
a popular VAR-I-CAM that was employed on many drag race engines actually employed a spring that would hold it to a predetermined point, and then...
in most areas, if the "SHED" has wheels on it, then it is considered "portable"... so, my shed is 30 X 30 and has six car wheels / tires on it....
simple,...220 single phase is "created" by using two "legs" of a 110 circut. amperage / wattage is same at the meter, allthough a 220...
MAIN THING IS THAT common stainless bolts that have TWO lines marked on the heads,...can often times be NOT AS STRONG or have the equivilant...
BUT WHEN I have to be an ACROBAT, I OFTEN have had to velcro the foot pedal box to one leg,...and push the pedal with my KNEE../ the original...
and also factoid is that ford model T and such all employed a tapered thread like water pipe.
within post number 10, you have said that you want the longest rod because it will also make the overall recriprocating weight less in the...
MMO is good ole bean oil... look itup. I buy it by the gallon. next to ATF/acetone...and berrymans B-12....
you said that you have a '27.... I would also guess that you did not know that the original 1927 (along with others) used a duct to heat the...
it is dificult to seperate a mancave/shop / lounge...when there is work to do,.. it is not that I am against a clean shop,...but when you have...
ATF / acetone... and tap the thing with a lead hammer.....
and the house is all antique stuff tooo
I saw the small block ford (289/302) front cover at the mickey auction back in 1979 era and made three of them out of solid plate aluminum... I...
MINE is kinda like post # 503 due to all the thieves, everything is hidden in "plain site".
ran various cars and continuously there since 1972. set a bunch of records of my own along with assisting or building engines for various others...
relatives worked at BOTH plants... all of the area between the coliseum and zoo is still pretty dangerious.
a lot of stuff goes to mexica. I dunno for certain , but most of the time when something this large has occurred, it is a person that you...
I would think that you allready know that , the Quap from harbor freight is at the bottom of quality and is considered as a one time use type of...
call moon. they bought potvin back in the 60's The only thing is, is that the original guy that ground the cams , ...died last month....
dont forget that the OIL FEED HOLE has to be positioned correctly or else the oil will not flow. the left shaft can be installed on right...
lowsquire, think a little bit. think of what makes the oil pump turn. .....put the oil pickup in a coffee can of oil.
I guess this is why you should test the pump pressure and flow and see that the oil is actually leaking out of the bearings before you put on the...
guys that weld A LOT, are not going to buy the snap on unit. if you are one of those that need a payment plan...then maybe snaponner is the...
the direction of the SWING NEEDLE is kinda secondary. the underlying issue is which direction does the IN PUT SHAFT have to rotate in order for...
post # 59 is thus WRONG... ...the lifter bank angle and the proper cam that is in that block does not change....
panic is correct in reply within post # 63 we are getting off the original subject........ mctim and PANIC, a "raised cam" setup within a...
Separate names with a comma.