The Jalopy Journal
Looks to me like a bicycle rack cut down and the column is where the seat post would go..
I recently got a QC and wondering what everyone using to seal the rear cover after a gear change? just a gasket sealer / maker?
I recently bought a 32 drop and noticed that the mounting bolt holes that bolt it on to the dash are two different theads. One is 5/16 -18...
I am rebuilding a 8BA oil pump, cause I have heard to many horror storys about Melling units. I bought a NOS "Republic" rebuild kit and noticed...
I was not able to find any "C" markings or anything else that would make me think Canadian. However it does have two bulges in the block on each...
Did the factory 99T 239 engines have steel sleeves like the 221's? I am looking at one to buy but not sure if it has been bored too far and...
RE: 1939 - 1942 Mercury & Ford truck blocks Does anyone know if the 221 '39-'42 flathead is the same block as the '39-'42 239 block? I know if you...
I think I figured it out. Macs sells two styles for the 1931 coupe rear roll down window. The style I have (A45962) says 1931, the other style,...
the channel is correct for the application, Macs and Brattons have the same one pictured for coupe rear roll down window.
Sorry for the dumb question........ I cant see what I'm missing here. This is a model A coupe rear roll down window. I have a original coupe rear...
Perfect, I don't have to track down a 8ba wheel, i'll just use the original 59A one. Thanks Guys!
Got a question...... If building a 59A Ford flathead with a Merc crank, must I use a 8BA flywheel? I thought the starters were the same, starter...
Ttt
can anyone 2nd that?
same ratio then too, right?
I know the 37-48 passenger worm and sector can inter-change with the F-1 box, but what about the 37-47 pick up worm and sector? Are the 37-48...
my problem is the main "V" shape , not the small teeth. Are these repoped?
Anyone know if these are repoped?
28 tooth cluster (passenger cars) is 2.82 to 1 29 tooth cluster ( P/U's 40 and later) is 3.11 to 1
I recently bought a '32 ford passenger grill shell and insert. The bars are in fairly good shape, but the supports are bent. Does anyone repop...
Looks and sounds great! Gotta be a great feeling to take her out for spin.
Yes, too big for me. Your attention is drawn to the headlights. just my .02 cents
I am runnin mine stock while I get my parts pile mostly complete. At 40HP, my max speeds are around 45-50 mph on level gound. I went through the...
For my aluminum quickchange or any aluminum application I tend to agree with goatroper02. If the stud bottomed out and was tightened would'nt the...
The collective power of the Hamb is awesome! Thanks guys!
I noticed that someone put one steel ball per hole (ball bearing) in the stud hole before the stud was installed on my quick change cover studs....
Welcome from Santa Clarita, I love those early VW ragtops!
Update: This morning I packed one of the bearings with grease trying to work it behind the bearing as much as I could and then topped off the...
I have done some look ups but can not find much on the cover bearings. I am trying to remove and replace the 2 bearings in the rear cover. I...
Mac's antique auto has them, part# 91A-7526 $11.00 kit
Separate names with a comma.