The Jalopy Journal
I've researched numerous postings on installing GM525 steering box in 40 Fords and have not been able to find information I need. My question is...
It would be interesting if the body in question has a serial number. Brookville does stamp a serial number on bodies they assembl in house. Star...
Look for the designation SAE30R6 on the hose. SAE 30R6 Application [IMG] Specially designed low-pressure hose for gas and gas/ethanol blends in...
I know this is an older thread but want to share a few things. -I've just ordered a set of door latches from Altman for my 40 pickup project. On...
I'd like to echo what "newredporch" stated regarding Gary (40ragtopdown). I purchased the center crossmember kit that he manufactures for my...
[IMG]
No, Florida.
Looking at the first picture, is that a hard brake line going to the brake tee on the back of the differential? It also looks to be bigger in...
“The car looked like shit and he always ran big ugly snow tires on the back. Fun times!” Reading the sentence above brought a big grin to my...
I did call the Moog help desk. The person I talked to was very helpful, very accommodating to my question and after searching on his end...
Thanks for the reply, unfortunately Neapco 3-3130 has 1.062" dia. caps and 1.125" dia. caps, I need all 1.125" dia. caps.
I appreciate your offer, look forward to a part number.
Thank you for the tip on Fleetpride, there is a location near by.
I have looked at Denny's website. I need a u-joint with all (4) caps 1.125” dia. Denny's u-joint has (2) 1.125” dia. and (2) 1.062” dia. caps....
I have looked at what Speedway offers. I need the u-joint to have all caps 1.125” dia. Their u-joint has (2) 1.125” dia. and (2) 1.062” dia....
Need help on my 1940 Ford pickup project, what u-joint might be available for: -Ford 8" rear, 1310 series yoke, 1.125" dia. caps, 3.219" between...
Thanks to all, I appreciate the help.
Looking for help identifying what year, displacement, horsepower of an engine. Stamped on the block in front of the passenger side cylinder head...
old iron 440: I want to add my admiration for what you are doing as guardian for your young grandson. You will be creating a bond, memories that...
I am attaching a link and hopefully it can be opened. Pages 16 & 17 might answer your questions. I found it useful. MBM Technical &...
This is exactly what I did to make mine fit. I removed a 3/8" section from the middle, machined a plug to fit in the inside diameter of the bar...
I agree totally, I found a posting on how to do it and they used a drywall screw, I used that and it was very easy to pull out the brass seat. Any...
You can "Google" 1929 Ford sedan hot rod, click on "Images" it will take you to probably 300+ pictures of sedans. Clicking on a picture will...
What thickness steel is used for thus style motor mount? Thanks
There is a discussion titled "41-48 ford front crossmember" from 2015. There is allot of good information about the Speedway crossmember, mostly...
I agree, the number on mine is stamped on the body channel in front of the seat also, on the driver side. My number is *120205050572*, I purchased...
Needs help with dimensions on Hurst cradle SBC mount. I am using the drawing provided to fabricate the motor mount. I could help with additional...
Totally agree! Sent from my iPad using The H.A.M.B. mobile app
UHMW (ultra high molecular weight polyethylene) is an extremely tough plastic with high abrasion and wear resistance. The versatility of...
Separate names with a comma.