The Jalopy Journal
I unbolt the spring pack then it spreads by hand easily. then using a c clamp and a long bolt like some all thread tighten the spring pack back...
You can cut the springs In the front if you just want it a little lower and in the rear a set of chevelle rear coil springs lowers it about 3...
Yes they can be lowered [ATTACH]
Speedway makes an adapter to run any fuel gauge with any sender, haven't used it but sounds like a handy product
The stock cross member would have fit if I wanted to use it and the stock seat fits too. There is a half inch of clearance for the driveshaft when...
Full size caps will fit because I am putting caps on mine to cover the rust but the baby moon style are specific to us wheel wheels
I designed this notch for the 49/51 mercs too [ATTACH]
We are bagging a 51 right now [ATTACH] [ATTACH] [ATTACH]
I am running the chrome version on my 40 dodge and on my car trailer. Got them from summit and they are really nice for the price except the...
what a story, just read it from the beginning...wow
Here is a Merc my brother and I chopped 6 inches and are currently finishing up [ATTACH] [ATTACH]
Try going to a local muffler shop they should carry them. A few months ago I needed some andI found them on eBay as well
Never sand with your hand and if you must use your palm not your fingers
Kelsey Hayes strippers! [ATTACH]
You can get the boat 2x1 intakes for pretty cheap, I got this one for around 150 [ATTACH]
Cool modified! If it were mine I would put lake style headers on it!
I just got finished chopping a4 door merc went very smoothly and kept the gutters too. Keep up the good work! [ATTACH]
My car is rubbed down with Gibbs and i like using it. It puts a satin sheen on the bare metal. I rubbed it down every two weeks or so. If you wipe...
4 door 51 merc my brother and I are building [ATTACH]
I am building a 27 t coupe on a model a frame and just made some tabs off the floor structure and bolted it to the top of the frame in six spots...
[ATTACH] [ATTACH]
The Eastwood vice mount flaring tool was a fantastic purchase for me
Sweet t!
The s10 t5s require an extra adapter because the input is longer than a standard Chevy. The camaro t5 has the standard Chevy length but a...
Is a 265 considered a reliable sbc over a similar year hemi motor? The hemi will always be cooler to 99% of people too! I bought a wilcap adapter...
My brother and I just did the interior in our 40 dodge. First time covering a seat and it all cost under $300 and a day of work. The sewing...
No more photos?!
My two favorite were the 41 ford in the suede room and the 40 merc upstairs [ATTACH] [ATTACH]
I have seen a torsion bar Mopar with bags before, they took the torsion bar key out and added another strut on the front of the lower I arm. The...
I also use the toilet rings work well!
Separate names with a comma.
The Jalopy Journal
