The Jalopy Journal
Helping a friend, purchased in early 70's, can't remember if purchased directly from Stahl or from magazine. In good shape for the age, worn very...
Yes, he is, we meet for breakfast about every Saturday morning, Vic Holley
ex-john lingenfelter hauler
1957 chevrolet sedan delivery(1508)-original n.e.d jr.stock car from north jersey-race car since aprox. 1968.garaged kept since than.retains much...
TOKHEIM clock face gas pump Nice restoration, probably not considered museum quality, but nice enough for a man cave or for 30-50's themed...
If this was an original engine with the rope seal, it takes a neoprene seal that is not available at your local parts store. The replacement...
Here's one
Here's one.
Thanks, vic
Butch, I'm the one that posted the ad for Kyle's car when you originally brought it. We've talked a couple of times. I brought the car about 2...
Same car, was never sold, just decided to have some fun with it. Beats sitting in the garage.
Here's a pic of my junior stock "clone" from the recent Gathering of the Geezers @ Kil-Kare Raceway.
Since the problem has been there since the rebuild, make sure one or both of the head gaskets are installed correctly. You can look down at the...
For parts & info try studebaker international, greenfield, in
59 Ford Skyliner Great job Bill!! Talked with Bill last Thursday about the 59 Skyliner and some misc parts (2 fenders, 2 doors, grille...
To measure lift, take a pair of calipers and measure from the bottom of the lobe to the top of the lobe, then measure across the lobe. Now...
Thanks, the area where it sits on carb is 4 7/32 instead of your normal 5 1/8 like holley & edelbrock. Is made to fit wcfb's & 4 jet rochester.
Helping a friend clean out his garage, found this air cleaner and he could not remember if it is oem or aftermarket. He is wanting to sell it,...
Either 63 or 64 @ Muncie IN, went with my uncle, who was a car salesman @ Ed Martin Ford. Went to see Martin's Galaxie race. I was born in 1950 so...
Helping a friend clear out his garage, ran across a Sears add-on a/c. He said he had it installed in a 66 Mustang with a V-8 in either 66 or 67....
OK, thanks.
Here is a pic of one.
Helping a friend clean out his garage to sell a few parts. Found this unopened box-Moroso ring & pinion part #8563. He could not remember what...
I'm helping a friend clean his garage & getting ready to sell some of his old parts, we found a set of the lifters with the rods, we are looking...
Here is a 55 junior stocker clone I'm building for the street, need some ideas to add to the paint. Some of the cars in the 70's had different...
Your total cc's will be between 90-95 depending on how far down the piston is. You should be around 9.25-9.50 c.r.
Should be driving by spring. Will have the "junior stock" look.
Here is some pics of a project I recently brought, felt lucky because the body & paint was already done, fenders, doors, half-quarters plus lots...
Reply to "scootermcrad" yes, some of the welds are scary. Once everything is fitted, the car will be disassembled and the ugly welds ground down...
Interior pics.
Separate names with a comma.
The Jalopy Journal
