The Jalopy Journal
i picked up a manual trans and bellhousing, it is a a833/my6, it uses a special bolt pattern chevrolet bellhousing. i was told the ball stuck for...
Still have the 35 ford, sorry for not see this sooner
Yes, the new one line up ok, they move the engine back Sent from my SM-S367VL using The H.A.M.B. mobile app
I bought the one I think it was brothers truck for 6 cyl to v8 swap. Bolt up no drill etc... came with new mounts and all hardware. Did not know...
Here is a shot[ATTACH][ATTACH] Sent from my SM-S367VL using The H.A.M.B. mobile app
The center dump headers will definitely not work. Moved the engine back to the rear position, headers are setting on the a arm and very close to...
Thanks for all the help, I found a video on YouTube that confirms the forward holes are for 67 and later, the rear holes are for 60-66. You learn...
It may be. When I put the engine in the aftermarket mounts have 2 holes in top and 2 in bottom, I had it toward the back at first, only 1 hole...
I bought the aftermarket tube style mounts. The original was a 250 Sent from my SM-S367VL using The H.A.M.B. mobile app
It would move the engine back approximately 1.5 to 2 inches Sent from my SM-S367VL using The H.A.M.B. mobile app
If the engine were in the rear holes only 1 of the lower mount holes line up. Sent from my SM-S367VL using The H.A.M.B. mobile app
I have a 66 c10, I put a sbc in it,I had a set of headers on it but in the location the motor mounts bolted up, the passenger side header hits the...
Lowered 17,500 buy it drive it home, located east central Indiana Sent from my SM-S367VL using The H.A.M.B. mobile app
What type of oil is everyone running? I have heard from several friends to run rotella diesel oil 15w40 because is has plenty of anti wear...
Here it is when I brought it home, parts are loosely hanging for photo[ATTACH] Sent from my SM-S367VL using The H.A.M.B. mobile app
I have decided to keep the 35. The work is not the problem at all. The hemi is a 270 red ram, muncie 4 speed. My decision was not easy. I really...
I know this is a loaded question but I am going to ask. I have a 35 Ford 5 window coupe, it needs a lot of work, no floors, no engine, no trans,...
I have been a member of this forum since 2009. I have met some great people! I have bought some great period correct stuff. I have learned a great...
Their were a couple responses on there as well that guys had gave of places where I could get new brakes, or spindles, or dropped I beam axles...
In the future I will be more careful. I have read the rules and try to comply. If the moderators have the time to go thru every post to determine...
700r4= modern??? 1983[ATTACH] Sent from my SM-S367VL using The H.A.M.B. mobile app
And I still wonder why I was targeted? I saw 2 posts scrolling thru within 5 minutes talking about modern transmission. Are their posts deleted...
Nope I believe this is my first!!! So if I put a 1962 chasis under my 48 is that too modern? I mean it is no longer I beam axle, would be a arms?...
Besides 1949 to mid 60s is modern technology compared to 1948 Sent from my SM-S367VL using The H.A.M.B. mobile app
I do understand that, I was asking about a more modern type frame and suspension to put under my 1 ton panel. I did not suggest a year. I wanted...
I had a post that seems to have been removed, not sure why. Was asking about upgrading the suspension on my 48 panel truck. Is there a reason it...
I am getting my engine close to its first start. I am GB oing to soak my lifters in oil, how long should I soak them? How long will an oil pump...
Probably hang, Sent from my SM-S367VL using The H.A.M.B. mobile app
Here is a couple[ATTACH][ATTACH] Sent from my SM-S367VL using The H.A.M.B. mobile app
There are a few pics any more??? Sent from my SM-S367VL using The H.A.M.B. mobile app
Separate names with a comma.
The Jalopy Journal
