The Jalopy Journal
How much are you asking? Even if its raw!
I got lucky enough to have gotten 2 decent passenger doors, and have wondered how much of a pain it would be to "flip" one to the drivers side....
subscribed!!!
I was thinking of putting in a roll up window in the back of my 34 cab. I had gone to the junkyard just to look for flat windows and I had found...
Hey Neighbor!!
Lock down as much as you can up front, plans and money!! File your business as SUB S, so no one can take your house etc. Get a really good...
ok, my father has dealt with castings since I was a kid and amazingly I picked up a few things!! First off, you will need a pattern, if you want...
iron has to be at 1800-2000 degrees to be fluid, aluminum may be something easier to start with
My dad has never bought new tools! All of them are either from garage sales, swap meets or flea markets. Working in the mechanical field for 20+...
I am not sure about Chicago, but there is Pro-polish in NW Indiana, Winfield I believe. Posted using the Full Custom H.A.M.B. App!
As a former mechanic, the manufacturer could not come out and say, but suggested NOT using Mobil gas due to the excess amount of additives
if you can figure out the pedal/ arm part, you can custom or a clutch cable for a Harley in any length!! Barnett cables are best...
have you tried your local Harley dealer? Or even A Jap bike dealer.....
Unless you can use 3D printing or paper prototype patterns
I have wrenched on and built Harleys for nearly 20 years now. I prefer the purpose built, mild tech, raw customs, and have always hated the...
Basically, you have 2 on/off switches tied together? What switch for what? Is it a 2 or 3 way key switch? Momentary push button or an on/off? Your...
is there a plate welded under the front crossmember? Or are those welded to the sides?
Yea the F-1 boxes that are going for $400-600 on eBay? Pass!!
It just comes across to me as a product they tried to re-invent, poorly. why would I want to mount it in the middle with 4 ft long steering shaft...
I like the clean look of it, but the center mount one seems questionable especially since i am going to run a flathead. Hoses, pulleys grinding...
I have seen varying opinions on the varieties of steering setups from BMW boxes, '32 vs. '34 ford boxes, vega and the Unisteer setups. But I...
Studebaker?
Refinery worker in the midwest.
I work on Harley's and there are more a few uses! The REAL question is 11 mm!!!
I am considering a side steer setup, what cars are the Mopar and BMW boxes from? I think I have heard the BMW is a 2002, early 70's
Thanks, Kess
Just joining this thread and want to clarify, did you cut a section out from under the windshield? Could not see first set of pics. And did you...
Separate names with a comma.
The Jalopy Journal
