The Jalopy Journal
My friend Mark can help you out. Wheeler Automotive 804 Mason Ave, Daytona Beach (386) 257-9902
Go ahead and cut up your factory 4spd Rancheros. They're boring stock. [IMG]
I live 3 blocks from there so I took a few crappy cell phone pics [IMG] [IMG] [IMG]
Sweet, Snow Thornsberry was my High School auto shop teacher. At the time the car was in a C/BFMR configuration. We used to fire it up with the...
[IMG]
That was a good show, aside from the fact that you almost lost an ear Mike Tyson style.
here's some info on pitman arms http://www.stangerssite.com/pitmanarms.html
Yes, that's a T-10 This is the shifter you need... http://beta.summitracing.com/parts/HUU-3918789/ with this install kit......
C&G early ford parts has the best prices on axle seals.
I'll be in this... [IMG]
Couple of shows at Franks Front Row Bar, 308 Seabreeze Blvd. (within walking distance from the bikini bars) Thanksgiving Night... H.R. from...
Mustang floor is completely different. Reproductions are not available. Any 60-65 Falcon or Comet can be a donor for the rear seat riser. I...
It's going to take a lot of work to make it right, luckily the cowl and lower windshield trim is the same between the two cars. There is about an...
Here's a few recent pics of mine...
The SROD bell is cable clutch as well.
Fat Hack, I have a 3.03 bellhousing and fork, I gotta keep the flywheel and block plate though for my swap.
There are a few ways you can put a t5 behind a 200 six. For high mount starters... 1.There are adapters available for the 2.77 and 3.03 3...
'63 Ranchero in better days [IMG] '64 Falcon 2dr Sedan [IMG]
Is it wrong that I knew what those numbers decoded to without looking it up? BTW "R" is for San Jose, California.
Roundbodies have 2" wide leaf springs, and Squarebodies have 2.5" wide springs but the bushings are the same width. I have '64 and up front leaf...
Not quite, Argentina only got the tooling for four door sedans, so the wagons, or rurals as their known as are built upon those cars. They didn't...
It might say newbie under my screen name, but I've been a registered member on this board for 9 years :)
That is an Argentine Falcon, they were made up untill 1991.
The bolt pattern is 108mm or 4.25", and yes Mark VIII's have aluminum diffs.
Does anyone know the min. thickness a flywheel for a '72 VW Ghia 1600 can be? thanks.
Chaz, I don't know if your're clear on this or not, but a 200 is the same engine as the 144/170 on the outside. Aside from the number of freeze...
I'll probably be going thur.-sat. I won't be driving anything or selling anything this year though.
Ray, OG lil E is correct, it's a Valiant bumper, but from a '63. I have a few Camaro bumpers as well but I don't know what years they are. The...
Someday. [IMG]
[IMG] [IMG] [IMG]
Separate names with a comma.