The Jalopy Journal
As long as you buy it, I will use it. My Saginaw is finished.!
I talked to D&L Transmissions and he verified that all of the gear teeth counts were correct. He said that probably I had some debris somewhere...
I might be in trouble after browsing the web for a 25 tooth 2nd gear, all are 26, like the one I have installed. I even looked for a cluster,...
Yes, I think you are on to something. If you are correct, 2nd gear on the mainshaft should be 25 teeth, not 26. How in the hell did you figure...
Yes, that's the problem with most all info. They give you the ratios, but not the teeth count, and I am not smart enough to figure it out....
OK, I have a picture that I drew of the input shaft gear teeth, the main shaft gears and the teeth and the cluster gear teeth. Somewhere in these...
I thought I bought the correct gears to build a one groove input shaft, 2.54 first gear, Saginaw trans. The gears lock up, so obviously I have...
[ATTACH] I am letting you guys know that this 3 speed T&F shifter is on ebay. Robert Brown, just search 3 speed T&F shifter. Thanks.
You are right, trains and cars seem to go together. I am restoring a 37 Caddilac and also build trains in 1:32 scale and here are a couple of...
1955 1956 1957 CHEVROLET PASSENGER CAR FUEL TANK SENDING UNIT 0-30 OHM 3/8" NEW on Ebay. This is the sending unit that I bought. I applied 6 vdc...
The 37 Cad. fuel sending unit was shot, so I got a 55 Chevy sending unit and removed the float mechanism and installed it on the 37's pickup and...
Thank you very much, but I have decided to go with a 4 speed Saginaw, thanks again, Bob.
Front and rear fenders for a 1937 Cadillac model 60 for 300. Call Bob, 813-753-8961 or email at [email protected][ATTACH]
--SOLD--1936 Packard 3 speed trans. for sale, previous owner says that it worked good, but don't hold me to that, as I haven't opened it up. I...
3 speed shifter for a Saginaw 3 speed trans. The T&F shifter moves the shifter arm forward almost to the stock position of most early cars. I am...
[ATTACH] I finally located Mark Moran and talked to him on the phone. Nice guy, soft spoken. He says he will no longer make the T&F shifter. He...
Does anyone know who still makes a 1937 Packard trans. to Chevy V8 adapter. In 1962, I purchased one of these adapters for a 1960 265 and used a...
Thanks everyone, I found one on Ebay and bought it, thanks again. Hello, my name is Bob Brown and I am trying to find out what happened to the T&F...
Separate names with a comma.
The Jalopy Journal