The Jalopy Journal
Complete set of Rod and Custom magazines for the year 2001. Price includes shipping via media mail. I also have other issues from 1998 through...
Boys and Girls it doesn't get much simpler than this "Dash Gauge Resistor". [IMG] $ 3.25 US available on eBay. Clips voltage to 6.8 volts. A...
Ohms resistance in suppression plug wires is a very misunderstood area of automotive electrical engineering. I would suggest that anyone that is...
NOT... For the full rundown on "Rule of Thumb" I could not resist... Al
I seldom respond like this because it usually starts a pissing contest. But here goes. Yep, It's just a zener diode.... But this specific diode...
Just stolen last night.... 1930/31 Model A Sport Coupe Body. It was the bare body.. cowl back, with windshield, both doors and rumble seat lid...
That would be correct... Sometimes I type faster than I think and as I get older the thinking gets harder..... Al
Early GM gauges (pre '65) were 0 Ohms Empty and 60 Ohms Full Late GM gauges are 0 Ohms Empty and 90 Ohms Full Since the GEO was built by either...
I was catching up on this thread since I hadn't read any of it since last year. When I was working in the steel fab shop I saw this same kind...
WARNING THIS IS SPAM. BUT This is good information, it is relevant and I believe Ryan is OK with a response like this. Boys and Girls, It...
OK... I didn't read every post cause I don't have time... I've got 100 plus items to pack and ship today... more Cali people will chime in I'm...
Never fails.... I'm doing a search to see if anybody else has posted the info, and, don't fine anything so.................. Well you get the...
Just passing this along..... Subject: ALERT 1965 Mustang Stolen from Kingman, AZ 1965 Mustang Fastback, White with Nostalgic Race Car Style...
Needles is the last place to stay "inside Cali" until you get to Barstow... Ok If you are beat and running late.... If you have an extra hour or...
16 or 24 grit disks to get the big stuff off... Find a local industrial chemical distributer that will sell you a phosphoric acid pickling or...
If you are running 14 gauge wire to your headlights you do not need relays. Even 16 gauge with good connections and switches will handle most...
Tri five Chevy's are a bit under wired to the headlights from the factory... So are Buick's and Pontiac's... Pretty much all of the other...
I like to save these stories for our job site tailgate meetings. They seem to make a better impression on the crew as they can better relate......
Use Non-Adhesive harness tape instead of the electrical tape and you won't have a sticky mess to deal with at a later date... And... If you need...
On my wifes HT we used 67-69 Camero springs with one coil cut... Sits low and handles great with a front sway bar.
AMEN
Yes, I should log on more often.... but I have so damn many irons in the fire I don't have time to scratch my ass.... You can always PM or email...
The 4 position switch can be had with a plain black "bar" knob (ie:"plain" = no "Lights" stenciled on it", a plain tan "bar" knob or a 7/8"...
Sorry for the delayed response.... I do need to log on more often.... The switch will handle 30 amps no problem... Let me add some tech to this...
My wifes '57 has a .060 over 283 with a mild cam and powerpak heads, early Edelbrock small port intake with a 450 cfm Holley... Runs great, gets...
Didn't you mean 50 amp??? The R.O.T. (rule of Thumb... Who was he anyway?) is to use a wire four sizes smaller than the wire you are...
Might I suggest some very cheap fire insurance.... Splice a 4 to 6 inch length of 16 gauge Fusible Link wire between the starter solenoid Bat...
That's it . I'm going to bed. April is here.
Pine Auto Lodi, CA. A real honest to goodness Parts Store that can get just about anything and everything in the aftermarket. They ship too.
It was all my uncles fault, he taught me to weld and do body work at a young age. I lived "the life" in high school... I worked on everybody...
Separate names with a comma.
The Jalopy Journal
