The Jalopy Journal
Thank you! I'll be in touch soon! Sent from my SM-G973U using The H.A.M.B. mobile app
Thank you! Sent from my SM-G973U using The H.A.M.B. mobile app
Had to mount an original grill to an aluminum radiator. Customer wanted to retain the appearance of a removable cap.[ATTACH] Sent from my...
I'm looking for the painted steel panel between the seat and the door. The original seat is still intact, but other interior pieces were missing...
Trying to I.D. and locate or get dimensions to make these seat guard/kick panel/door sill pieces. Figured this would be the place for answers....
I made a dimple die set and wanted to test it out, so I whipped up this brushed stainless cube and stand.[ATTACH] Sent from my SM-G973U using The...
Yes. This cup is a size 14. Most anything bigger than an 8 has a diffuser in the cup. Sent from my SM-G973U using The H.A.M.B. mobile app
Repeat on opposite side.[ATTACH] Sent from my SM-G973U using The H.A.M.B. mobile app
All tig welded of course.[ATTACH] Sent from my SM-G973U using The H.A.M.B. mobile app
New tube all welded in[ATTACH] Sent from my SM-G973U using The H.A.M.B. mobile app
This fixture was built fairly quickly from scrap, but it allowed me to move the flange back while still maintaining the orientation of the header....
Had a guy want some fender well exit headers for his Galaxie but this off the shelf set was 4" short. Normally I would just build a new set, or...
Both sides done. Thanks for following along![ATTACH] Sent from my SM-G973U using The H.A.M.B. mobile app
Around $325. The other side only needs the light adapted so it'll be around $145. Sent from my SM-G973U using The H.A.M.B. mobile app
The bulb post and connectors were pretty rotten and the screws and threads holding the bucket to the stanchions were all rusted solid causing the...
Playing around with my tig welder[ATTACH] Sent from my SM-G973U using The H.A.M.B. mobile app
Fancy instagram photo. Looks like a rocket ship. Very happy with how it turned out and that it looks as cool as it did in my head.[ATTACH] Sent...
Finished product. [ATTACH][ATTACH][ATTACH] Sent from my SM-G973U using The H.A.M.B. mobile app
Lots of tig welding, followed by lots of sanding.[ATTACH][ATTACH] Sent from my SM-G973U using The H.A.M.B. mobile app
Quick test fit to check the look and make sure all the hardware is in line so the set screw is on the bottom of the trim ring when installed on...
Got the bucket back into one piece.[ATTACH][ATTACH][ATTACH][ATTACH] Sent from my SM-G973U using The H.A.M.B. mobile app
Since the Pontiac assembly has studs I had take the out and cut a ring to fit it to the bucket.[ATTACH][ATTACH] Sent from my SM-G973U using The...
Had a customer want to change over to LED bulbs but still maintain glass lenses. For the size of the bucket and ease of install went with '50...
Most of the really colorful welds are tig welds on stainless steel. The color comes from temperature and the amount of shielding gas coverage.
[ATTACH]
Thank you, its a very slow moving project but it'll be fun when its done.
Quick mockup of the rear suspension [ATTACH]
On the outside I have about 1.25 inches stickout of the tungsten and on the inside i use a small 45 deg pencil torch.
[ATTACH] [ATTACH]Some recent welds on exhaust collectors from my new job at SPD.
Separate names with a comma.