The Jalopy Journal
after autozone gave me the wrong one I had my ford 170 starter rebuilt for $60
the 62 is a 6 cyl car the 65 is v8 yeah I knew about the different ball sizes. its going to be entire suspension and rear end swap. I was almost...
I been offered a 1965 rancher parts car. will all the parts like the front arms, rearend and all the work with my 62? I know this is been covered...
The door plate if its orignal to the car should say what it is. my falcon manual says for 61 #3 3.10 #4 4.0 #5 3.2 j 3.5
I ended up just having the old one rebuilt. but i still have a SLUSH-O-Matic . I was just wondering if they gave you the right one. sense I dident...
well im not sure if this is what your talking about but this was my new starter i got from autozone looked like after first start up. It was ment...
I used to have a 220v napa welder worked great on sheet metal. I redid my floors and a few patch panels with it. its really not much more of a...
maybe a stuck solenoid try tapping it and make sure all the wires a connected good to it
is the solenoid working ? is the wire feeding but no gas?
I was wanting to lower my 62 3" but after looking at the space between the drive shaft and the hump plus my fat I would be in trouble
if you have a light tail stock and reverse you should be ok. just go real slow and lots of oil . also invest in a high quality gun tap they can...
its means i hope i spelled it right
acetone sp?
most definitely but personally I think 100 spokes look bad on anything
yeah I figure it is but hey hoping maybe he has some info on the bolt hole locations on a milled head
kewl65 that head on the motor is that a oz heads or has the log been milled off?
I am stealing this from some one else on here but .......Kingpins..perches..perch thickness 1928-31..51 7/8....36 1/4...2 1/4....continuous...
not the answer to your question but have you checked out any spring shops ? They can custom make them and there not that expensive
My grandfather raced at San Jose speedway in I believe late 40's and early 50's. His name was Earl Smith. From what I am told he had the last...
where about in modesto?
between the website info and the forum there is alot of info there.
yup. but i have heard of people milling the head down . Im not sure exactly why. maybe they flow better but I dont know
from what i understand if you use the 200ci head on the 170 ci motor it will lower your compression
hole saw is doable. I have done it lots of times one time 80 2" hole in stainless sheet. just go slow and lots of oil and break thru evenly or our...
I was trying to measure mine yesterday while they are still on and I got 5 1/2 long , 2 1/4 wide and 7/16. Im not completely sure on all of them tho.
very cool cant wait to see it
are you going to do a detailed build up on the frame here?
wow after 2 days of reading the HA/GR area and now this comes up. guess i have to learn how to build a roll cage
all I am getting is a white screen when i click on the category ok its way over to the side
oh yeah first thing I tried. My turn signals stopped working for a bit. I took the wheel off got them going again somehow. but it looks like I...
Separate names with a comma.