The Jalopy Journal
Looks great, hope mine turns out that nice!
Probably have to go with, lit it on fire!!......By accident
Nice save! I would build that one!!
Nice!!
Pics of said daughter?
I've run both the 390 and 352 in a 65 f100, I've also run the ford tripower from a 406 in the same truck. My 390 had twice the power and got...
The spot welds are on the inside of that lip of metal inside the cab above the back window. Once you cut your roof off ( above that seam) and...
I cut mine off and welded another on from a doner truck. I cut about 1/2 to 1" above the seam all the way around then drilled out the spot welds,...
Class of 1980 Torrington ct. I had a 66 old 442 455 4spd with a big cam and a 850 holley. Thank god it did'nt have posi or I probably would'nt be...
Yea could be a 351c or 351/400m, they both have the same style heads and valve covers. I've converted a couple propane motors back to gas. The...
Love me some 390's. It takes a little knowledge, but they can be built to run really nice. Awesome torque and even good mpg if done right!
I usually go, it'll probably be pretty small, due to the heatwave we're in. I enjoy it, allways a few bargains.
Question Bubba, I've got a points dist from a 302 ford mercruiser motor. I am wanting to run this in my 5.0 roller cam motor. I've heard these are...
I"ve got a 50 shoebox that I'm building and struggling with the same issue. I'm leaning towards a 305 HO with bigger 1.94/1.60 valves, some monor...
I had a 390 that knocked till it warmed up. I replaced the bearings and had the crack reground and left the pistons alone because it had good...
I've allways thought that would be cool. I cant see you pics for some reason, but I'd like to put one on my 65 f100 as well, although, You don't...
350 chevy's with the 76cc heads will not get good mileage. The quench is horrible and the cams have retarted valve timing for lower emissions. I...
You can either mill the choke horn and radius the sharp edges or use the stub stack w/ no choke blade. Another source of aiflow is the throttle...
You will need the old timing chain cover, basically everything from the front of a v-belt 302. You'll end up with an extra dipstick if I remember...
I like your x-member and tapered frame rails!!
I used to paint w/centari for a living in the eighties. We allways thinned it at least an extra 10%. Allways go w/ the slowest possible reducer...
That would be tough.
You're correct. We would spray laquer clear over the metalics and commence the color sanding.
Back in my bodyshop days, we used self-etching primer like dupont variprime, then laquer primer sprayed wet on wet ( no need to sand the variprime...
Nice score!
Cool, welcome from East Texas
That's a bute man, have fun!!
I've had a couple 390's do that in hot weather. Mine were 2 problems. Vaporlock and gas boiling out of the float bowls. I put a phenolic spacer...
Cant really go wrong with an old gasser!!
No way..... Awesome!!!
Separate names with a comma.