The Jalopy Journal
do you have a pic or link to the box you have? Which hose is leaking? Both?
glad SOMEBODY got it! Its been on Craigslist forever. Cool wrecker.:D
weld in is no prob on steering....
mines in the frame rail back by the gas tank. Its really quiet. I will go out and see if I can get the part # for ya.
do you have a NAPA?!?! heres a list: NAPA U-BOLT SIZE LIST “ROUND” U-Bolts for round axle tubes NAPA PART NUMBER THREAD Ø / AXLE...
I have a 61 and want to do the same thing. I drive mine alot. Taking it from DFW to east TX today. Never know what can happen...I've been in...
dust w/ cement or.. use kitty litter and do 'the twist' on the litter over the stain. grind it into the stain w/ your shoes. grind it in till its...
PB Blaster. Just paid 20 bucks for a can of Gibbs.Wasn't impressed. :(
I have a pair of 9" axles in the back of my truck. They splines are about 1.5" long. I have cut down axles (splines) a bit before, but never on...
what brand of starter? Make SURE you have real starter bolts and not regular bolts. I just went thru this and it was an AUTOZONE JUNK starter.
new optima's suck. I guess they used to be good when they were made by Gates.
I ran square receiver tube shafts on my rockcrawler. 1/4 wall. you could slam the shafts on the rocks, hit the gas and the shaft would 'walk' the...
search turned this up in .01 seconds: http://www.jalopyjournal.com/forum/showthread.php?t=168603&highlight=shortening+front+axle ooops, youve...
winner!!:d
maybe these threads can help.. http://www.jalopyjournal.com/forum/showthread.php?t=303119...
where did you buy the starter? You tried shims and it still gets stuck? hmmm Youre sure that the starter and flexplate are compatible? Good...
flatheads-forever.com ?
be sure to repost it later this afternoon so more people see it when it drops to page 14.:rolleyes:
I'll run outside and take a few.
I cut the latch off the door and welded onto the body. Took the 'pin' off the body and put on the door. Then the stock handle off the inside and...
pm sent.
well, mine started fine w/ no noise. Then I went back later and tried to start it. GRRRRRRRRRIIIII-PING! Its baaack. :( I loosened the bolts and...
I had THE most horrible grinding sound I've ever heard on the starter on the sbc in my Apache. I was not in the mood to blow $ on a new starter,...
I'm a doctor. [IMG]
howell top (not mine!): [IMG]
I had one like the speedway one that I built. Worked great, but only bends to 90*. It was kind of slow, but it is easier to pump-in a degree or 2...
Thanks Mark, thats what I figured. Just seemed like a good axle and figured I might as well rebuild it and keep it around instead of tossing it.
Just got a pile of axles, and it had a 63 f100 9" and front i-beam. The 9" seems to be a big bearing (3.15?) its got the shafts and 3rd pulled. My...
was just throwing it out there for those looking to do large radius bends.
Separate names with a comma.