The Jalopy Journal
Ahhhh, problem solved ;) [IMG]
520 or 530 motorcycle chain would be plenty and these folks have sprockets of any you would likely desire. http://sprocketspecialists.com/
IMO the liquor doctored fuels we are usually stuck running now are more prone to boiling under heat and vacuum conditions. I would add an electric...
To answer the initial question,,, Ill Conceived???
I know the crisis has already been circumnavigated, but I can give these type of sockets a HUGE thumbs up. They have saved me many hours of...
Engine is amazing. How do they keep the rear tires off the bodywork?
Those damn Demapublican a-holes!!!!!!!!!
First couple of wives........................
Looks like the OD ratio is .70 so 4.10x.70=2.87. The 3.08 will be 2.156
You really will have a hard time finding better products, advise or people than at SPI. And Squirrel is right, there are many levels of intensity...
Fairly good guide. http://www.southernpolyurethanes.com/perfect-paint-job
The page from the FSM above states that the manual and auto cars had different rear cam bearings, so if the rear bearing is for a solid lifter...
I think the plan is to let the pcv pull a good strong vacuum and then just pour the oil over the engine and let it get pulled in the crankcase.
Unless it's a Viper, they are the opposite. I'm obviously being argumentative.
That's awesome, if there's a will..................... Wonder if it could have happened in a crash? Motor vehicle crash.
Guy takes his dog to the shows with him.
I have been shipping carbon fiber wings for sports cars for about 10 years. I get charged "dimensional weight". I could ship them across the...
Bought one the other day to spray Duratec clear for composites. You need a 2.0 tip to do it so I chucked the tip in the lathe and drilled it right...
I thought I was going to paint the A100 something more modern, a metallic probably. But the more I worked on it and the countless hours sanding...
They just hang out there to me, look very clunky after your restyle. But tastes are what they are. Neat work.
This is great, please fix those BUMPERS!!!!! ;) [IMG]
Looking for a particular color...........
Amazing for sure
Just read this through from the beginning. Great stuff, great work.
The 5 speed automatic transmission that was used with the 5.7 Hemi is called the NAG1. It is pretty much the mercedes W5A580 or 722.6. It is very...
I've probably wasted enough in billable time doing things that this would have breezed through. Unfortunately that invoice remains unpaid, I need...
Read this entire thread after showing up really late to the whole thing. What a great job and execution. Very cool that you pulled it off. I've...
Look at the angles between the yokes and the shaft, that's what is important. Not a great illustration.......
Top illustration has angles the same, bottom one has different angles. What is critical is the angles between the shaft and the yoke at each end....
They go from about $80k to about $450k
Separate names with a comma.