The Jalopy Journal
It (resistor) being on negative side means little it's still in series with the points whether open or closed ,it reduces the working voltage to...
Don't mix your torque converters up on them old 2 speeds sone buicks and chevys had different input spines sizes . The weak point on a real power...
Aluminum bearings A series bearings a must have .Use a cast crank not forged...430 /430 lift 112 centerline cam .Rochestor chevy 283 4gc carb...
Idle mix screwsboth screwed 2 &1/4 turns out(do not tighten these) ? Is your vacuum advance pod leaky ? Distributor spark port is on right side...
Not having dune these adjustments i can try and tell you what or how i solved a ps problem for a 62 belair Badically i got a sreering unit off if...
something called spectra chrome isnt it its real crome spryed from a sata pint gun hear a guy at werk talking bout it
hi guys having built several engines carfully with differant heads i can say use 305 2 barrel heads. But if you want more power then a 327 is...
13 out 17 the 49 olds was one looked like a 389 poncho
thar is nuthin wrong with that original rochester 4GC for that manifold take my word for it the 4GC had a little fuel transfer problem when...
head gaskets /or posible sabatage if it were a nissan 4 cylinder the timing chain will saw through the back of the chain cover/pump sump area when...
Hi and thanks for options ive built a few Sb chevys. You cant beat the old 4GC rochester 4 barrel on the straitway ,not smogless thou....
do thes guys you might have to call?...
herers a related hint although not bending as follows have you ever wanted to weld a small pot metal or aluminum part back together ? ( if so) i...
http://groups.msn.com/STRICTLYCHEVROLET/general.msnw?action=get_message&mview=0&ID_Message=2783&LastModified=4675659095918175216 and...
i was on some hho fuel site the outher day( slingblade ") and i was looking at something i never heard befor. this video was discribeing useing...
i said it waz strange i didnt lie thar boys
at one time i supposed tar would stop rust from growing under you panels geting to them to zebart it is a science of love . might requre some...
if this were a subaru you would go to the dealer for an oversize 10mm stud (no heli)(no locktight)
yess put a magnet near the drill bit while drilling then after use a vacume cleaner with a peice of hose taped into the hose end to suck the hole...
i once spent a week installing a newer chevy stereo into the front case half of a 62 impalla radio it worked great but took a lot of doing
old tanks that i solder or weld for repair i just put some gas on the outside and obviouly leave the cap off the tank i place it(tank) in a place...
one tyme a long time ago a guy put the float in upside down and that floods http://newagemetal.com/pages/ServiceProcedures/B/1964/index.htm...
this is going to set hard but for information sake uhhhh errrrrhhh simpli put a 307 crank has less stroke you could leave the pistons alone and...
i wanted to share a discription of what i was thinking about useing the chevy chain cog to mount a belt cam cog to and about how to put...
thar is one flaw with this and it is that the number of teeth on the gears i think vary by some equation to centerline to center length .so i...
me thinks we miss the point me thinks anouther point comes to mind that point is this "medeocre abilitys are supported by big mouths little...
thanks i checked out the jesel unit pretty good pics no ideas about possible oem cog matches here yet huh ? you know like say one cog...
Okay ? what if thar were SB chevy timeing belts it may seem unuseual.. that.. i would ask this but is thar a timing belt or conversion...
proubably dont have the skill if you never have pried and hammered jacked or chain pulled a squashed panel but if you do attempt i suggest you...
if i have an engine appart that i put grease on the cylinders ( wheel bearing grease)like 10 years ago and the cylinders havnt rusted any thars a...
Separate names with a comma.