The Jalopy Journal
Do any of you guys that need E-T Mags Uni-Lug washers and lugs ever think to contact us? We still produce the washers and lugs for our old wheels,...
Here we go, Dick Beith started and owned ET Mags, the corporate entity was Wheel Centre inc.. In 1972 he sold the company to Lee filters, a...
we have 15,16 17 18 my sedan has 15 and 18, a friends pickup has 17 16 Let me know if i can help, we have the wheels in stock in lug mount of pin...
Just call us we can narrow a 15x8 to 15x6 it will have a 2" BS and look like a 1 piece wheel from the face side.
The wheel may have been a foundry test, checking wall thickness variation and shrinkage after machining. We routinely drill holes as it is an easy...
any width 1/4" increments
The type of lug you choose depends on your usage. Bulge Acorn lugs, easy to install wheels, lugs stay tight , no washers to bend and rust, and...
Our adapters are only for 5 on 4 1/2" and 4 3/4" patterns, but the guys at So-Cal speedshop have a 5 on 5 1/2" pattern adapter that works with...
The cars look great , hurry up I want to see them done. Are those the 18x8 with 4" bs and the 16x5.5 with a 3" bs that we sent to Pete & J's ?...
Mom and dad brought me home behind the seat in a 1946 MG TC, right hand drive. He kept the car until the lat 80's then sold it to a guy from...
We use Gorilla brand exclusivly, they are high quality and fairly priced. We have never had a bad lug in 16 years. Scott Posted using the Full...
I can't take it, I have some original drawings we used in the 60's and 70's, notes say 8-32 for 5 spokes , et super -#6 & #8 pan head self...
Hey guys, I still have tires for your 16 x 10 wheels. Get t hem while you can Scott Posted using the Full Custom H.A.M.B. App!
I have several of these flat head manifolds for Scot blowers and I have the tooling to make more if needed. These could be adapted to other...
note, I have all of Nance Engineering's casting tooling , wheels, steering, birdcages ect.
Here we go, cracks on the lip and barrel are repairable if not to large, ie 1/4 of the way around is not repairable. Also some of the wheels in...
btt
note: early american wheels had 5/8" lug holes and required 5/8" shank lugs. It was found that these early lugs with 1/2" studs, that were short...
Just got my new 15 x 7 Classic 5, to fit 1963 to 1968 corvette, and clear the disc brakes and a perfectly stock fender and also the parking brake...
Guys, this wheel, as with most of our front wheels can be narrowed to 3 1/2" and a few can be made narrower. All you need to do is ask, since...
Here is E-T MAGS new 15×5 1/2 Sebring wheel . It is made in a bolt on version and a true Knock-off version. The wheel is a low pressure casting...
well the tire is selling well, get them while they last. scott
price is $360.00 ea. + shipping if you have a 9.5 t0 11" rim this is the tire, If you need a 30 to 31"tall tire for this rim size there are no...
We now have hoosier prostreet radial in stock 31 x 12.50 R 16 The perfect size for 16 x 10 or 11" wheels on Highboys and Fenderless Rods. Give us...
Here are the photos of Dicks flathead. HE made patterns to cast the deck, heads and front covers. His son Blaine, an expert machinist, did alot of...
I'll call him and have him send me some pics. I have seen it run and Seen the parts and patterns he used to made it. Dick is a very creative guy...
A friend of mine, dick beith, has done it. Start with a 351w block and add a new deck to get the valves in the block, install sleeves to get...
We can Do it , though the price might not be the same . ouch scott
A while back I saw a post about these, I Found some old catalogs and thought you guy might want the correct answers to the post. Just look at the...
These were a wheel we made by taking 2 spun halfs and furnas brazing them together, these were done prior to the centerline rivited wheels. They...
Separate names with a comma.